I could be missing something, but as I see it, what voice indexing would provide is for the ability to have a 'voice cursor' (which may or may not be the same as your emacs cursor) tracking of location where the TTS engine is up to when generating speech from the submitted text. The would, for example, enable for the pausing and then subsequent resuming of speech whereby the resumed speech would start from where the speech was previously paused. In some systems, this is very important becasue the system only sends large chunks of speech at a time. For example, I've seen a simple TTS interface for reading files where it will just start reading the file. You odn't have the ability to ask for just a page, paragraph, sentence, line, word. You just ask for it to start speaking and then yuou can pause and resume speech. The other thing you may get is cursor tracking of speech. A cursor might move through the text as it is spoken so that when you pause speech, the cursor is at that point in yhour text. This can be useful for people who want to read along with the speech i.e. the speech is an aid to visual reading. While I can see the potential benefits in having the ability to get and use speech index information, I've not found it very high on my wishlist for emacspeak. This is primarily because emacspeak provides very fined grained control over the size or chunks of speech I send at a time. Depending on what I'm doing, I'll read/browse the data using a movement/chank size which suits my need. For example, I'f I have a large buffer of text I want to read, I'm unlikely to ask emacspeak to just read the whole buffer. Instead, I'm more likely to as it to read by page, paragraph or perhaps sentence. With emacspeak, I find it is very much about moving around using the unit (letter, word, sentence, paragraph, page, buffer) best sutied for what I'm doing. I find this provides an adequate balance between my use case and complexity/consistency across speech servers. This has also enabled me to experiment with different TTS engines. For example, many years ago, I wrote speech servers for the Cepstral TTS engines. These were a commercial TTS engine that at the time, had high quality voices. The additional complexity and overheads involved in a TTS interface model which supported voice indexing would likely hav made this much harder to implement and discouraged the type of experimentation which is at the heart of emacspeak. Likewise, I wonder if we would have had the other TTS engines, some of which have come and gone, like the flite and festival servers or the server written in C, or the existing mac, swiftmac servers or the experimental windows, speech-dispatcher and JS servers that are out there currently in various stages of development. I personally don't see the amount of required effort justifyhing the benefits given we already have the capability to work with varying chunks of speech. Yes, it would provide some convenience, but at a high cost which I feel is hard to justify. However, provided someone can implement something which does not require changes to the existing servers or their design, I would say go for it. A lot can be learnt from implementing a TTS server. In fact, I've learnt a lot from failed attempts to implement TTS servers as there is a considerable amount of subtle and non-obvious aspects to a TTS server which only become clear when you try implementing one, making it a great learning experience. At least it was for me. Victor Tsaran <vtsaran@xxxxxxxxx> writes: > I guess, the question stands: what user-facing problem are we trying to solve? > > On Tue, Apr 9, 2024 at 3:14 AM Parham Doustdar <emacspeak@xxxxxxxxxxxxx> wrote: > > That's true, Emacspeak doesn't currently "read" from the speech server process as far as I've seen, it only "writes" to it. > Fixing that isn't impossible, but definitely time consuming. > The other concrete issue is that last time I checked, console screen readers read all the text in one chunk. They don't use the > audio CSS (forgive me if I don't use the correct name here) that Emacspeak has, which requires you to play audio icons, > speak text with different pitch, and pauses. All of this means that you have to do extra heavy-lifting to really track the index, > because the index you get back from the TTS engine isn't simply a position in the buffer -- it is just the position in the > current chunk of text it has recently received. > So that's why I'm curious if we really think it's worth it. It could be, or not, I'm not opinionated, but I'm also realizing that in > our community, we don't really have a good mechanism to discuss and decide on things like this. > > On Tue, Apr 9, 2024 at 8:35 AM Tim Cross <theophilusx@xxxxxxxxx> wrote: > > You are overlooking one critical component which explains why adding > indxing support is a non-trivial exercise which would require a complete > redesign of the existing TTS interface model. > > For indexing information to be of any use, it has to be fed back into the > client and used by the client. For example, tell the client to > update/move the cursor to the last position spoken. > > There is absolutely no support for this data to be fed back into the > current system. The current TTS interface has data flowing in only one > direction, from emacs to emacpseak and from emacspeak to the TTS server > and form the tts server to the tts synthesizer. There is no existing > mechanism to feed information (i.e. index positions) back from the TTS > engine to emacs. While getting this information from the TTS engine into > the TTS server is probably reasonably easy, there is no existing channel > to feed that information up into Emacspeak. > > Not only would it be necessary to define and implement a whole new model > to incorporate this feedback, in addition to also working with TTS > engines which do not provide indexing information, you would also likely > need to implement some sort of multi speech cursor tracking so that the > system can track cursor positions in different buffers. > > The reason this sort of functionality seems easy in systems like speakup > or speech-dispatcher is because those systems were designed with this > functionality. It is incprporated into the base design and part of the > various communication protocols the design implement. Adding this > functionality is not something which can just be 'tacked on'. > > The good news of course is that being open source, anyone can go ahead > and define a new interface model and add indexing capability. However, > it may be worth considering that it has taken 30 years of development to > get the current model to where it is at, so I think you can expect a > pretty steep climb initially! > > John Covici <covici@xxxxxxxxxxxxxx> writes: > > > Its a lot simpler -- indexing is supposed to simply arrange things so > > that when reading a buffer, and you stop reading, the cursor will be > > at or near the point where you stopped. Speakup has had this for a > > long time and that is why I use it on Linux. But its only good for > > the virtual console. Now speech dispatcher has indexinng built in, so > > if you connect to that and use one of the supported synthesizers, > > indexing works correctly and I don't see any performance hit. I think > > all the client has to do is connect to speech dispatcher, but check me > > on this. > > > > On Mon, 08 Apr 2024 08:25:27 -0400, > > Robert Melton wrote: > >> > >> Is indexing supposed to be like per reading block, or like one global? Is the idea > >> that you can be reading a buffer, go to another buffer, read some of it, then come > >> back and continue? IE: Index per "reading block"? > >> > >> Assuming it is global for simplicity, it is still a heavy lift for implementation on > >> Mac and Windows. > >> > >> As they do not natively report back as words are spoken, now > >> you can get this behavior at an "Utterance" level, by installing hooks and callbacks > >> and tracking those. With that you would need to additionally keep copies of the future > >> utterances, even if they already where queued with the TTS. > >> > >> Considered from the POV of index per reading block, then you need to find ways to ident > >> each one and its position and index them and continue reading. > >> > >> Sounds neat, but at least for my servers, right now, the juice isn't worth the sqeeze, I > >> am still trying to get basic stuff like pitch multipliers working on windows via wave > >> mangling and other basic features, hehe. > >> > >> > On Apr 8, 2024, at 05:20, Parham Doustdar <parham90@xxxxxxxxx> wrote: > >> > > >> > I understand. My question isn't whether it's possible though, or how difficult it > >> > would be, or the steps we'd have to take to implement it. > >> > My question is more about whether the use cases we have today make it worth it to > >> > reconsider. All other questions we can apply the wisdom of the community to solve, if > >> > we were convinced that the effort would be worth it. > >> > For me, the way I've got around this is to use the next/previous paragraph > >> > commands. The chunks are good small enough that I can "zoom in" if I want, and yet > >> > large enough that I don't have to constantly hit next-line. > >> > Sent from my iPhone > >> > > >> >> On 8 Apr 2024, at 11:13, Tim Cross <theophilusx@xxxxxxxxx> wrote: > >> >> > >> >> > >> >> This is extremely unlikely to be implemented. It is non-trivial and > >> >> would require a significant re-design of the whole interface and model > >> >> of operation. It isn't as simple as just getting index information from > >> >> the TTS servers which support it. That information has to then be fed > >> >> backwards to Emacs through some mechanism which currently does not > >> >> exist and would result in a far more complicated interface/model. > >> >> > >> >> As Raman said, the decision not to have this was not simply an oversight > >> >> or due to lack of time. It was a conscious design decision. What your > >> >> asking for isn't simply an enhancement, it is a complete redesign of the > >> >> TTS interface model. > >> >> > >> >> "Parham Doustdar" (via emacspeak Mailing List) <emacspeak@xxxxxxxxxxxxx> writes: > >> >> > >> >>> I agree. I'm not sure which TTS engines support it. Maybe, just like notification streams > >> >>> are supported in some servers, we can implement this feature for engines that support it? > >> >>> Sent from my iPhone > >> >>> > >> >>>>> On 8 Apr 2024, at 10:24, John Covici <emacspeak@xxxxxxxxxxxxx> wrote: > >> >>>> > >> >>>> I know this might be contraversial, but, indexing would be very useful > >> >>>> to me, sometimes I read long buffers and when I stop the reading, the > >> >>>> cursor is still where I started, so no real way to do this adequately > >> >>>> -- I would not mind if it were just down to the line, rather than > >> >>>> individual words, but it would make emacspeak lots nicer for me. > >> >>>> > >> >>>>> On Fri, 05 Apr 2024 15:39:15 -0400, > >> >>>>> "T.V Raman" (via emacspeak Mailing List) wrote: > >> >>>>> > >> >>>>> [1 <text/plain; us-ascii (7bit)>] > >> >>>>> as a single call is that it ensures atomicity i.e. all of the state > >> >>>>> gets set at one shot from the perspective of the elisp layer, so you > >> >>>>> hopefully never get TTS that has its state partially set. > >> >>>>> note that the other primary benefit of tts_sync_state > >> >>>>> > >> >>>>> Robert Melton writes: > >> >>>>>> On threading. It is all concurrent, lots of fun protecting of the state. > >> >>>>>> > >> >>>>>> On language and voice, I was thinking of them as a tree, language/voice, > >> >>>>>> as this is how Windows and MacOS seem to provide them. > >> >>>>>> > >> >>>>>> ---- > >> >>>>>> > >> >>>>>> Oh, one last thing. Should TTS Server implementations be returning a \n > >> >>>>>> after command is complete, or is just returning nothing acceptable? > >> >>>>>> > >> >>>>>> > >> >>>>>>> On Apr 5, 2024, at 14:01, T.V Raman <raman@xxxxxxxxxx> wrote: > >> >>>>>>> > >> >>>>>>> And do spend some time thinking of atomicity and multithreaded systems, > >> >>>>>>> e.g. ask yourself the question "how many threads of execution are active > >> >>>>>>> at any given time"; Hint: the answer isn't as simple as "just one > >> >>>>>>> because my server doesn't use threads". > Raman-- > >> >>>>>>>> > >> >>>>>>>> Thanks so much, that clarifies a bunch. A few questions on the > >> >>>>>>>> language / voice support. > >> >>>>>>>> > >> >>>>>>>> Does the TTS server maintain an internal list and switch through > >> >>>>>>>> it or does it send the list the lisp in a way I have missed? > >> >>>>>>>> > >> >>>>>>>> Would it be useful to have a similar feature for voices, being > >> >>>>>>>> first you pick right language, then you pick preferred voice > >> >>>>>>>> then maybe it is stored in a defcustom and sent next time as > >> >>>>>>>> (set_lang lang:voice t) > >> >>>>>>>> > >> >>>>>>>> > >> >>>>>>>>> On Apr 5, 2024, at 13:10, T.V Raman <raman@xxxxxxxxxx> wrote: > >> >>>>>>>>> > >> >>>>>>>>> If your TTS supports more than one language, the TTS API exposes these > >> >>>>>>>>> as a list; these calls loop through the list (dectalk,espeak, outloud) > >> >>>>>>>> > >> >>>>>>>> -- > >> >>>>>>>> Robert "robertmeta" Melton > >> >>>>>>>> lists@xxxxxxxxxxxxxxxx > >> >>>>>>>> > >> >>>>>>> > >> >>>>>> > >> >>>>>> -- > >> >>>>>> Robert "robertmeta" Melton > >> >>>>>> lists@xxxxxxxxxxxxxxxx > >> >>>>> > >> >>>>> -- > >> >>>>> [2 <text/plain; UTF-8 (8bit)>] > >> >>>>> Emacspeak discussion list -- emacspeak@xxxxxxxxxxxxx > >> >>>>> To unsubscribe send email to: > >> >>>>> emacspeak-request@xxxxxxxxxxxxx with a subject of: unsubscribe > >> >>>> > >> >>>> -- > >> >>>> Your life is like a penny. You're going to lose it. The question is: > >> >>>> How do > >> >>>> you spend it? > >> >>>> > >> >>>> John Covici wb2una > >> >>>> covici@xxxxxxxxxxxxxx > >> >>>> Emacspeak discussion list -- emacspeak@xxxxxxxxxxxxx > >> >>>> To unsubscribe send email to: > >> >>>> emacspeak-request@xxxxxxxxxxxxx with a subject of: unsubscribe > >> >>> > >> >>> Emacspeak discussion list -- emacspeak@xxxxxxxxxxxxx > >> >>> To unsubscribe send email to: > >> >>> emacspeak-request@xxxxxxxxxxxxx with a subject of: unsubscribe > >> > >> -- > >> Robert "robertmeta" Melton > >> lists@xxxxxxxxxxxxxxxx > >> > >> > > Emacspeak discussion list -- emacspeak@xxxxxxxxxxxxx > To unsubscribe send email to: > emacspeak-request@xxxxxxxxxxxxx with a subject of: unsubscribe
|Full archive May 1995 - present by Year|Search the archive|
If you have questions about this archive or had problems using it, please contact us.