Re: dectalk giving invalid command parameter

["Thomas Ward" <slingshooter@xxxxxxxxxxx>]

Hi, John.

All your settings are right on the money. No problems there. I suspect you
are using either Red Hat 8 or Mandrake 9 which have some changes which does
this to the dectalk.

----- Original Message -----
From: John covici <covici@xxxxxxxxxxx>
To: <raman@xxxxxxxxxxx>
Cc: <emacspeak@xxxxxxxxxxx>
Sent: Saturday, November 23, 2002 11:32 PM
Subject: Re: dectalk giving invalid command parameter


> Well, it seems to work in other applications and as a synthesizer for
> a screen reader under windows, so a bad cable seems unlikely.  Here
> are the ssty settings for this tty, is there a problem with any of
> them?
>
> speed 9600 baud; rows 0; columns 0; line = 0;
> intr = ^C; quit = ^\; erase = ^?; kill = ^U; eof = ^D; eol = <undef>; eol2
= <undef>; start = ^Q; stop = ^S; susp = ^Z; rprnt = ^R;
> werase = ^W; lnext = ^V; flush = ^O; min = 1; time = 0;
> -parenb -parodd cs8 hupcl -cstopb cread clocal -crtscts
> -ignbrk -brkint -ignpar -parmrk -inpck -istrip -inlcr -igncr -icrnl ixon
ixoff -iuclc -ixany -imaxbel
> -opost -olcuc -ocrnl onlcr -onocr -onlret -ofill -ofdel nl0 cr0 tab0 bs0
vt0 ff0
> -isig -icanon iexten -echo echoe
echok -echonl -noflsh -xcase -tostop -echoprt echoctl echoke
>
> on Saturday 11/23/2002 T. V. Raman(raman@xxxxxxxxxxx) wrote
>  >
>  > all I can guess is that you have a bad cable.
>  > >>>>> "John" == John covici <covici@xxxxxxxxxxx> writes:
>  >
>  >     John> The reset state went fine, but when I arrow down to a blank
>  >     John> line I am still getting the invalid command parameter
>  >     John> followed by right bracket .
>  >
>  >     John> on Saturday 11/23/2002 T. V. Raman(raman@xxxxxxxxxxx)
>  >     John> wrote
>  >     >> C-e d R dtk-reset-state >>>>> "John" == John covici
>  >     >> <covici@xxxxxxxxxxx> writes:
>  >     >>
>  >     John> Its a Dec talk express, I am pretty sure the rom version is
>  >     John> the latest 44ab (version string) from December 2 1997.
>  >     >>
>  >     John> on Sunday 11/24/2002 Jason
>  >     John> White(jasonw@xxxxxxxxxxx) wrote
>  >     >> >> John Covici writes: > Hi.  I am having problems using
>  >     >> emacspeak >> with my DecTalk external, I > get a message from
>  >     >> the Dec-talk >> itself invalid command parameter ] -- > it
>  >     >> happens whenever I >> down arrow to a blank line and other
>  >     >> places.
>  >     >> >>
>  >     >> >> What is the firmware version of the DECTALK? Is it a DECTALK
>  >     >> >> Express or one of the older models?
>  >     >>
>  >     John> -- John Covici covici@xxxxxxxxxxx
>  >     >>
>  >




John> ----------------------------------------------------------------------
-------
>  >     John> To unsubscribe from the emacspeak list or change your
>  >     John> address on the emacspeak list send mail to
>  >     John> "emacspeak-request@xxxxxxxxxxx" with a subject of
>  >     John> "unsubscribe" or "help"
>  >     >>
>  >     >> --
>  >     >> Best Regards, --raman
>  >     >>
>  >     >>
>  >     >> Email: raman@xxxxxxxxxxx WWW:
>  >     >> http://www.cs.cornell.edu/home/raman/ AIM: TVRaman PGP:
>  >     >> http://www.cs.cornell.edu/home/raman/raman.asc
>  >     >>
>  >




>> -------------------------------------------------------------------------
----
>  >     >> To unsubscribe from the emacspeak list or change your address
>  >     >> on the emacspeak list send mail to
>  >     >> "emacspeak-request@xxxxxxxxxxx" with a subject of
>  >     >> "unsubscribe" or "help"
>  >
>  >     John> -- John Covici covici@xxxxxxxxxxx
>  >
>  >




John> ----------------------------------------------------------------------
-------
>  >     John> To unsubscribe from the emacspeak list or change your
>  >     John> address on the emacspeak list send mail to
>  >     John> "emacspeak-request@xxxxxxxxxxx" with a subject of
>  >     John> "unsubscribe" or "help"
>  >
>  > --
>  > Best Regards,
>  > --raman
>  >
>  >
>  > Email:  raman@xxxxxxxxxxx
>  > WWW: http://www.cs.cornell.edu/home/raman/
>  > AIM: TVRaman
>  > PGP:    http://www.cs.cornell.edu/home/raman/raman.asc
>  >
>

> --------------------------------------------------------------------------
---
>  > To unsubscribe from the emacspeak list or change your address on the
>  > emacspeak list send mail to "emacspeak-request@xxxxxxxxxxx" with a
>  > subject of "unsubscribe" or "help"
>
> --
>          John Covici
>          covici@xxxxxxxxxxx
>
> --------------------------------------------------------------------------
---
> To unsubscribe from the emacspeak list or change your address on the
> emacspeak list send mail to "emacspeak-request@xxxxxxxxxxx" with a
> subject of "unsubscribe" or "help"
>
>

-----------------------------------------------------------------------------
To unsubscribe from the emacspeak list or change your address on the
emacspeak list send mail to "emacspeak-request@xxxxxxxxxxx" with a
subject of "unsubscribe" or "help"