[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index][Search]
ViaVoice download problems
Well, this information is displayed at many points udring the
emacspeak install,
for instance the rpm installer asks you to look at docs/VIAVOICE
appended below.
Tell me how you would have written it
to be able to find the information you missed.
$Id: VIAVOICE,v 17.0 2002/11/23 01:29:10 raman Exp $
Notes On Using IBM ViaVoice Outloud (Software TTS) with Emacspeak:
IBM ViaVoice TTS (Text To Speech) formerly known as IBM ViaVoice
Outloud is a text to speech synthesis engine that allows you to
produce synthetic speech from text using a sound card. The TTS engine
can be obtained from the RedHat FTP site --see below.
* Pre-requisites:
You need to obtain and install the IBM ViaVoice TTS
(previously called Outloud) engine. The The ViaVoice TTS engine
itself is not distributed as part of this package --see
ftp://people.redhat.com/jlamb
linked from
http://www.redhat.com/services/techsupport/accessibility/s1-access-install.html
You should only need to install the RTK (runtime toolkit).
The Outloud speech server uses midi for producing auditory
icons. You need to obtain and install package stdiosynth
from http://www.leb.net/pub/blinux/emacspeak/blinux/stdiom.tar.gz
Note that that package comes pre-built --to compile it
yourself you need the commercial OSS installation;
however you do not need the commercial OSS package to use
the pre-built binary.
(Hackers note: I'm looking for a stdiosynth replacement,
if you have the cycles to work on this it will be much
appreciated.)
* Installation:
** Is Outloud Working?
Once you have successfully obtained and install IBM ViaVoice
Outloud for Linux (RTK and SDK), first verify that the
synthesis engine works by running the sample programs that
come with that package. Note that the sample programs only
come with the SDK.
If you choose to only install the RTK (Run Time Kit)
and run into trouble, you'll need the SDK to troubleshoot
your problem.
If you have only installed the RTK,
first build the ViaVoice TTS server by:
cd servers/linux-outloud
make
try starting the ViaVoice speech server by typing
bash $ tcl /usr/share/emacs/site-lisp/emacspeak/servers/outloud
at the shell prompt.
Only after verifying that the TTS engine works and that you
hear the speech output should you proceed to installing the
Emacspeak Outloud support.
** Have You Installed Emacspeak?
Before attempting to build and install ViaVoice Outloud
support for Emacspeak you should first install Emacspeak the
normal way. See the Emacspeak Makefile for instructions.
** Compiling Outloud Support For Emacspeak:
Change to the linux-outloud subdirectory
of the Emacspeak source distribution.
make
This should compile the Emacspeak Outloud TCL library to
produce a file called tcleci.so.
* Testing:
Next, test that your installation of the Emacspeak Outloud
support works. The ViaVoice Outloud speech server is called
outloud and is installed in the emacspeak directory along
with other speech servers.
To test this server, do: tcl <full path to outloud> This should speak
a welcome message and display a tcl> prompt if all is well.
* Using Outloud With Emacspeak:
Proceed to this step *only*
after successfully completing all of the previous steps.
You can either make the Outloud engine your default
synthesizer by setting environment variable
DTK_PROGRAM as follows befoer launching Emacs:
export DTK_PROGRAM=outloud
Alternatively, you can switch to the Outloud engine while
emacspeak is running by
invoking command dtk-select-server --type
C-e d d ret outloud ret
* Using outloud as the default synthesizer:
Once you've confirmed that everything is working with the
Outloud engine and Emacspeak, you can make outloud your
default synthesizer by:
** If you start emacspeak by typing emacspeak:
Supply the -o command-line option i.e.
start emacspeak as
emacspeak -o
** If you have emacspeak launched from inside your .emacs:
set variable dtk-program to "outloud"
before you load emacspeak-setup.el
* Missing Features:
The following standard emacspeak features are not yet supported:
*** All caps beep
*** Capitalization beep
* Known Problems:
** Outloud server dies sporadically:
*** Avoid Character echo if possible
There is a known problem with the ViaVoice Outloud engine on
Linux with certain sound cards when stopping and starting speech in rapid succession.
When using Emacspeak, this bug manifests itself as the speech
server sporadically dying.
In my own use, I've found the Outloud server to be mostly
usable with character echo turned off. However, expect to
have to restart the server at times by hitting C-e C-s until
this bug in the Linux soundcard support goes away.
*** Sound Device Should be Free:
If you have other programs using the sound device, the
Outloud engine will not work.
If you use the Outloud engine for your primary TTS,
you will not get any speech feedback if you play realaudio
or use other programs that open and hold the wave device
--unless you are using a new soundcard like the SBLive
capable of playing multiple streams of audio.
Alternatively, get a sound card like the Soundblaster SBLive
capable of mixing multiple channels of audio.
Local variables:
mode: outline
paragraph-separate: "[ ]*$"
end:
>>>>> "Anthony" == Anthony Tibbs <tibbsa@xxxxxxxxxxx> writes:
Anthony> I'm trying to setup Emacspeak 17 on a RH8 system, but
Anthony> have had a problem downloading the ViaVoice component. I
Anthony> follow the link to the IBM page, but I can't find any
Anthony> kind of Linux SDK/RTK anywhere! Only Mac and Windows.
Anthony> Is there some trick to this?
Anthony> -----------------------------------------------------------------------------
Anthony> To unsubscribe from the emacspeak list or change your
Anthony> address on the emacspeak list send mail to
Anthony> "emacspeak-request@xxxxxxxxxxx" with a subject of
Anthony> "unsubscribe" or "help"
--
Best Regards,
--raman
Email: raman@xxxxxxxxxxx
WWW: http://www.cs.cornell.edu/home/raman/
AIM: TVRaman
PGP: http://www.cs.cornell.edu/home/raman/raman.asc
-----------------------------------------------------------------------------
To unsubscribe from the emacspeak list or change your address on the
emacspeak list send mail to "emacspeak-request@xxxxxxxxxxx" with a
subject of "unsubscribe" or "help"