Re: cygwin: festival+mbrola works. emacspeak+festival_patch doesn't

[Pierre Lorenzon <Pierre.LORENZON@xxxxxxxxxxx-psud.fr>]

Hallo Matthew

I see something wrong at the first reading of your
message : see bellow the file emacspeak.scm
doesn't seem to be at the right place :
From: "Matthew Qvapul" <pikpus@xxxxxxxxxxx>
Subject: cygwin: festival+mbrola works. emacspeak+festival_patch doesn't
Date: Thu,  6 Nov 2003 17:02:56 +0100

pikpus> 
pikpus> Hallo.
pikpus> Before festival 1.4.3 compilation I:
pikpus> 1)  patched it
pikpus> cygwin $ patch -p1 < emacspeak-18.0-festival.patch
pikpus> 2) copied:
pikpus> cp emacspeak.scm festival/lib/emacspeak.scm
	Must be in /festival/lib/etc/emacspeak.scm !
	There's a load request for this file at
	line 53 in the fst-speak.el file. It will
	not produce any intern error in emacs if
	this request fial because the error will occure
	inside festival. A log message is probably
	available in the festival log buffer.

	Please try to set the file at the right place 
	or change the access path in fst-speak.el
	(do not forget to compile again emacspeak
	in this case) and tell me if it works better.
pikpus> 3) also added mbrola files.
pikpus> 4) compiled festival+mbrola
pikpus> 5) tested if it worked by invoking festival and:
pikpus> festival> (SayText "Hallo World")
pikpus> 
pikpus> I could hear it, so it works
pikpus> 
pikpus> Next I started compiling emacspeak+festival_mbrola_patch:
pikpus> 1) tar -zxvf emacspeak-18.tar.gz
pikpus>   It'll create emacspeak-18.0 directory
pikpus> 2) cd emacspeak-18.0/
pikpus> 3) cp ../emacspeak-18.0-festival.patch .
pikpus> 4) patch -p1 < emacspeak-18.0-festival.patch
pikpus> 5) in etc/emacspeak.sh.def file change line:
pikpus> export FST_EXEC=/usr/local/share/efm/festival/bin/festival
pikpus> to point to festival executable file, for example:
pikpus> export FST_EXEC=/home/festival/festival/bin/festival
pikpus> 6) in Makefile change the following line, because emacs is
pikpus> installed in /usr/, not in /usr/local:
pikpus> prefix = /usr/local
pikpus> to
pikpus> prefix = /usr/
pikpus> 
pikpus> 7) make
pikpus> compilation was succesfull but where quite a lot of warnings.
pikpus> For example:
pikpus> emacs -batch -q -no-site-file  -l /home/emacspeak/emacspeak-
pikpus> 18.0/lisp/emacspeak-
pikpus> load-path.el -l /home/emacspeak/emacspeak-18.0/lisp/emacspeak-
pikpus> loaddefs.el -l /ho
pikpus> me/emacspeak/emacspeak-18.0/lisp/emacspeak-cus-load.el  -f batch-
pikpus> byte-compile dt
pikpus> k-speak.el
pikpus> While compiling the end of the data in
pikpus> file /home/emacspeak/emacspeak-18.0/lisp/
pikpus> dtk-speak.el:
pikpus>   ** The following functions are not known to be defined:
pikpus>     tts-interp-silence, tts-interp-notes-initialize,
pikpus>     tts-interp-notes-shutdown, tts-interp-note, tts-interp-tone,
pikpus>     dtk-speak-using-voice, tts-interp-queue, tts-interp-speak,
pikpus>     tts-interp-dispatch, tts-interp-stop, tts-interp-set-rate,
pikpus>     tts-interp-set-character-scale, tts-interp-toggle-split-caps,
pikpus>     tts-interp-toggle-capitalization, tts-interp-toggle-allcaps-
pikpus> beep,
pikpus>     tts-interp-set-punctuations, tts-interp-reset-state,
pikpus>     tts-interp-pause, tts-initialize, tts-interp-sync,
pikpus>     tts-interp-letter, tts-interp-say
pikpus> Wrote /home/emacspeak/emacspeak-18.0/lisp/dtk-speak.elc
pikpus> Done
pikpus> 
pikpus> I decided not to attach complete compilation log unless
pikpus> necessary.
pikpus> 
pikpus> 8) make install
pikpus> 9) efm
pikpus> I can't hear "festival" word although:
pikpus> cygwin $ ps xawu | grep festival
pikpus> I    644    532    644        992    ?  500
pikpus> 12:26:28 /home/festival/festival/
pikpus> src/main/festival
pikpus>       548    644    644      1204    ?  500
pikpus> 12:26:31 /home/festival/festival/
pikpus> lib/etc/ix86_unknown/audsp
pikpus> 
pikpus> in efm' *Messages* buffer:
pikpus> (emacs -q -l /usr/share/emacs/site-lisp/efm/lisp/emacspeak-
pikpus> setup.el -l /home/Administrator/.emacs)
pikpus> Loading tool-bar...done
pikpus> Loading image...done
pikpus> Loading tooltip...done
pikpus> For information about the GNU Project and its goals, type C-h C-
pikpus> p.
pikpus> Loading cl-macs...done
pikpus> Loading emacspeak...
pikpus> Loading cl-extra...done
pikpus> Loading emacspeak-loaddefs (source)...done
pikpus> Loading emacspeak-cus-load (source)...done
pikpus> Loading emacspeak...done
pikpus> Loading voice-setup...done
pikpus> Loading voice-setup...done
pikpus> Loading voice-setup...done
pikpus> Source file `/usr/share/emacs/21.2/lisp/shell.el' newer than
pikpus> byte-compiled file
pikpus> Source file `/usr/share/emacs/21.2/lisp/comint.el' newer than
pikpus> byte-compiled file
pikpus> Loading replace...
pikpus> ad-handle-definition: `occur-mode-goto-occurrence' got redefined
pikpus> Loading cl-seq...done
pikpus> ad-handle-definition: `occur-next' got redefined
pikpus> ad-handle-definition: `occur-prev' got redefined
pikpus> Loading replace...done
pikpus> Loading /usr/share/emacs/site-lisp/efm/sounds/default-8k/define-
pikpus> theme.el (source)...done
pikpus> Source file `/usr/share/emacs/21.2/lisp/dired.el' newer than
pikpus> byte-compiled file
pikpus> Loading bytecomp...done
pikpus> Loading byte-opt...done
pikpus> Loading regexp-opt...done
pikpus> Loading mule-util...done
pikpus> Loading easymenu...done
pikpus> Loading /usr/sbin/emacs/21.2/i686-pc-cygwin/fns-21.2.1.el
pikpus> (source)...done
pikpus> Source file `/usr/share/emacs/21.2/lisp/net/browse-url.el' newer
pikpus> than byte-compiled file
pikpus> jde-java-font-lock: building names cache...empty
pikpus> scroll-down: Beginning of buffer [2 times]
pikpus> signal: Beginning of buffer [4 times]
pikpus> signal: End of buffer [10 times]
pikpus> signal: End of buffer
pikpus> 
pikpus> 
pikpus> My question is:
pikpus> what is wrong.
pikpus> Probably the answer is quite difficult, so at least please tell
pikpus> me how to debug the problem.
pikpus> 
pikpus> Greetings
pikpus> Thanks
pikpus> Matthew 
pikpus> 
pikpus> -----------------------------------------------------------------------
pikpus> Dołącz do nas 11 listopada! Wyjątkowa Parada Niepodległości w Gdańsku!
pikpus> http://wiadomosci.wp.pl/wiadomosc.html?wid=1645501
pikpus> 
pikpus> 
pikpus> 
pikpus> -----------------------------------------------------------------------------
pikpus> To unsubscribe from the emacspeak list or change your address on the
pikpus> emacspeak list send mail to "emacspeak-request@xxxxxxxxxxx" with a
pikpus> subject of "unsubscribe" or "help"
pikpus> 

	best regards 

	Pierre

-----------------------------------------------------------------------------
To unsubscribe from the emacspeak list or change your address on the
emacspeak list send mail to "emacspeak-request@xxxxxxxxxxx" with a
subject of "unsubscribe" or "help"