Good evening, Dr. Raman, Attached please find the final draft of my Emacspeak tutorial. As you requested, the file is the original .org source file of the work. I hope that it proves a useful resource to newcomers to Emacspeak. Regards, Alex Midence
#+TITLE: A Simple Introduction to Emacspeak
#+AUTHOR: Alex Midence
#+EMAIL: Ho-Lamat@xxxxxxxxxxx
#+DESCRIPTION: A non-technical introduction to Emacspeak.
#+KEYWORDS: Emacspeak audio desktop accessible linux editor authoring programming
#+TEXT: This document is part of the Vinux Documentation Project. For more information about Vinux, please visit the [[http://www.vinux-project.org][Vinux Homepage]] by following this link. The speech synthesizer used in Vinux installations of Emacspeak is Espeak. Adjust any references to Words per minute, pitch and so forth to the speech synthesizer of your choice. Also, while Vinux is the distribution whose users are targeted in this tutorial, some pains were taken to make instructions as distro-independent as possible. Exceptions to this include but are not limited to using synaptic package manager to install packages and instructions to type "sudo" in the command line for things requiring root permissions as this is how such things are done in Ubuntu which is what Vinux is based upon as of this writing.
* Introduction
In past years, there have been quite a few excellent reference
materials written on Emacspeak by its author, Dr. T. V. Raman, and by
other members of its user community. Because of this, I will tell you
right now that I won't try to reproduce their work since for one
thing, I can't hope to equal the job they did much less top it, and
for another, I find writing reference materials to be a rather boring
and tedious business best left to the pros. No, dear reader, this is
something far simpler and far more digestible. What we have here is
a no frills Emacspeak how-to or tutorial if you will permit such a
term whose main purpose is to tell you what you need to know and do to
accomplish something productive within 5 minutes of launching it. So,
it's going to be very non-technical and very superficial. Because of
this, there will be many places where you are encouraged to refer to
the Info Pages or to another on line resource that does provide that
technical information so you can consult it and really start learning
this amazing application. It is my conviction that you will be quite
unable to truly realize your productive potential until you have
tinkered with it a bit and learned a thing or two about how it works
under the hood. This is Linux, after all where a look under the hood
of any application is a must from time to time. I hope you find this
tutorial useful and that it helps you get past the usual hurdles
newcomers to Emacspeak face. If there is anything you would like
included in future versions, e-mail me directly or send an e-mail to
the vinux support group at [[mailto:vinux-support@xxxxxxxxxxx][vinux-support@xxxxxxxxxxx]].
** Who is this for?
This tutorial is for anyone who is interested in adding another
accessibility tool to their assistive tool chest whether they come
from Windows, Mac or Linux. A lot of thought has gone into how to
introduce this tool to people who are coming from GUI environments.
Because of this, it will deviate from the usual path and ease you into
hotkeys by first showing you the menu system of Emacs. We will also
talk about movement and navigation using more common naming
conventions such as the ones you would find in Gnome, Windows or Mac.
This is because these days, the overwhelming majority of blind people use Windows and the screen readers that make it accessible. Gone are the days when most of us were command line users though, we have not entirely lost our love for the mighty hotkey. So, don't think the hotkeys will be ignored. Far from it since the menus in Emacs are its training wheels and you can't really start doing things quickly until you have learned at least the basic hotkeys. Learning hotkeys takes time though and, meanwhile, you actually want to DO something as in right now without having to feel like a schoolboy or girl memorizing lines for some poem or play or something like that. This is why menus will be talked about a lot.
What this tutorial will not teach you is how to use Linux in general.
That topic is huge and far too encompassing to cover here. If you
come across terms you don't understand or have never heard before, I
want you to make extensive use of Google, info, and the man pages. If
there is one lesson which is Linux-wide which I will teach you, it is this:
Linux does not hand everything to you on a silver platter ready for
you to just pick up a fork and dig in. This is especially true of
information. It assumes you are smart enough to learn through
research and that you are capable of thinking for yourself. This is
pretty much the modus operandi across all flavors of it and in much of
the software that runs on it. Inevitably, it will manifest itself in
the people who use it as well. In more extreme cases, some Linux
users can come across as testy and unhelpful geeks from a newbie's
perspective when they are asked what they feel are simple questions
whose answers aren't hard to find with a little effort on the part of
the inquirer. It is because they assume that you are smart enough to
use a search engine, browse forums, read help files and tinker a bit
to solve your problem. It is what they did, after all, and they
figure you can do the same. They can usually tell when you haven't
based on your questions so, research before you ask or be frank in
admitting that you haven't and why because this is expected of you in
this environment much more so than in Windows or Mac where you paid
money therefore you have some rights when it comes to support. Many
are particularly touchy about whether or not people read help files or
manuals since they might have put time and effort into writing that
stuff and don't feel like repeating themselves when they've made their
help available to you in this form. Writing this stuff isn't easy and
the overwhelming majority of those of us who write tutorials, man
pages, help files and documentation don't get paid a single solitary
cent for our efforts. The best pay in the world someone who puts
their time and mental resources into writing an informational resource
for no monetary compensation can get is for someone to use that
resource thereby making their time and efforts worthwhile. "Hint hint
... nudge, nudge, know what I mean?" Please tell me you know Monty
Python! Ok, enough rabbit trails.
So, while this document will hold your hand in parts to some extent in
order to minimize some of the infamous Emacs/Emacspeak learning curve,
I will not insult your intelligence by over explaining when I know
perfectly well that you are capable enough to read and research other
sources on your own nor will I seek to duplicate the work done by
others when there are lots of perfectly serviceable sources of
information on just about any and all topics I covered here. In spite
of this, you may decide that there is something missing or something
can be made better and you are the one who can make that happen
whereupon, you roll up your sleeves, stock up on caffeine and turn
your back on Morpheus' restful embrace for a night or two while you
make your contribution. If you do, then, be welcome among us for you are become one of us in truth. Free and open source software is about everyone working together towards making things better for the good of all. It is the price we gladly pay for free software.
** How best to use this Tutorial
The best way to use this tutorial is to read it using an application
and in an environment you already know well such as note pad or,
Internet Explorer in Windows with your favorite screen reader or a
text editor like Gedit
or the Firefox browser in Gnome with Orca as the screen reader or, maybe Nano or Vim in the Linux Console with
Speakup. Mac users, I am sorry, I don't know Mac at all so I am
afraid it'll be up to you to decide which editor works best for you on
your end. If you are using a browser with a screen reader to access
this in its html form, you can navigate quickly through major chapters
by using whatever key your screen reader designates for level 2
headings. I do not recommend you try reading this tutorial in Emacspeak if you don't know anything about it since you'll spend most of your time trying to move around in it and won't be able to focus on the content as easily. This might cause you some frustration and the whole point of this is to make things easier on you so you don't give up when you first make contact with Emacspeak. It's got a very unique way of doing things and, it can take some getting used to at first.
Another thing to note is that this document is not a replacement for
reading the Emacspeak user's manual and the Emacs User's manual and
certainly not for going through the Emacs Tutorial. These are all
very valuable resources and you would be very well-advised to put them
to use. In fact, if you are already running Linux, you can take a
gander at the Emacs user's manual by typing info Emacs at the command
line and browsing through it there. It'll make you want to try stuff
and this is a good thing.
** What is Emacs and obtaining information on it through Info.
So, what is Emacs? I thought we were learning about Emacspeak here.
Well, Emacs is the application which Emacspeak causes to talk and
react in a way that is more productive and efficient for someone using
speech to interact with their computer. Ok, so what is Emacs then?
You will find lots and lots of definitions and descriptions of it on
line claiming all sorts of things about it from calling it a superb
editor, or a desktop to calling it a bloated piece of software that
doesn't compare to whatever else that person thinks is awesome and
cool. Honestly, though, Emacs is a text editor that got extended and
enhanced to such an extent that it will now do just about anything you
want to do on a machine. It will let you edit since it's never
stopped being a superb text editor. It will play music for you, brows
the web, send e-mail, organize your life for you, run a shell for you,
help you write programs and webpages and on, and on, and on. It's because it can do all this stuff that people refer to Emacs as a desktop even though it is still at its heart an editor. That's Editor with a capital E, mind. It is probably the single most powerful editor you will ever use. If you want to take a moment to read about the many uses to which you can put Emacs, you could hop online and read the [[http://www.gnu.org/software/emacs/manual/html_node/emacs/index.html][web version of the Emacs manual]] by following the link I just gave you.
Emacs, believe it or not, is pretty easy to learn. It has a
reputation for being newbie friendly. There are tons of resources
inside of it and out on the web for learning how to use it and become
productive quickly. For instance, [[http://www.emacswiki.org/emacs/EmacsNewbie][here is a nice page]] dedicated
specifically to newbies learning their way around Emacs. When you first bring it up and, for that matter,
from anywhere within it, you always have the option of typing control
h t and bringing up the Emacs Tutorial. Anyone who wants to learn to
use Emacs should take this tutorial at first opportunity. I cannot recommend it strongly
enough. This will show you how to move around in Emacs and walk you
through a few basic editing commands. Even more help can be found
inside the Info Pages. Info is the system Emacs uses to store its
help files. They are browseable much like webpages are with hyperlinks and the like. In fact, before we go any further, let's talk about the help system a bit.
*** The Emacs Help system
Emacs has been around a long time. Because of this, and thanks to the
efforts of the man who wrote it, Mr. Richard M. Stallman of Gnu fame,
and all the others who contributed, the help files are very extensive,
very well-written and a valuable tool for anyone learning Emacs. To
be honest, it is quite possibly one of the best documented pieces of
software I have ever seen period. If you want to have a look at
things before you bring up Emacs, you can type info emacs at the
command line prompt and browse the help pages from there or, of
course, you can browse them from within Emacs itself. To access the
help system, you either select it using the menu bar, use a c-h
combination, or by pressing m-x (meta x) and typing info. More on m-x later.
Shortly, we will discuss getting help from the menu bar. Then, we'll have a look at some hotkey shortcuts to this information. First though, some naming conventions which will make your life easier:
+ Control key combinations: Anything requiring you to hold down the control key and press another key will be abbreviated as follows: c-h for control h, c-f for control f and so forth.
+ Meta key combinations: Meta is a key assigned to the alt key in most keyboards. It is abbreviated the same way the control key is so, m-f and m-b are meta f and meta b. They are performed by holding down the alt key (meta) and pressing the other key indicated. M-f is alt+f in Windows-type lingo.
+ Shift key combinations: You probably guessed this one. s followed by a dash is short for holding down shift and hitting something else. Most of the time, shift is held down in conjunction with something else. For instance, m-s-, is alt+shift+comma. These combinations are actually pretty rarely displayed as m-s-something. Usually, they tell you to hit m-something where that something can only be gotten to by hitting shift. For example, m-< for top of buffer and m-> for bottom of buffer. You can usually only get to the < and > signs by holding shift and hitting the comma and period respectively. So, m-s-, and m-s-. That takes forever to write hence the shortened form I told you about.
+ Prefixes: To get around the problem of running out of hotkeys, Emacs has prefixes. Prefixes are hotkey combinations that make Emacs wait for a second or third key to execute something. For instance, c-e c-a. c-e is the Emacspeak prefix. c-a turns on auditory icons when preceded by this prefix. Another example is c-e d 5. c-e is the emacspeak prefix, d is the dtk speech sub prefix and the 5 is the present speech rate level 5. That one has 3 key combinations. This way, you can always have hotkeys for stuff without fear of your keyboard running out of keys to combine. Clever, huh? Here are three very common prefixes for you:
- c-e: This is the Emacspeak prefix. Anything you want to run that has been put there as an emacspeak-specific feature, you will access with the c-e prefix and then the combination in question. For instance, c-e c-a turns on your auditory icons. Try it out, auditory icons are like what Jaws users might call sound schemes. Use them a bit and they become self-explanatory.
- c-u: Argument prefix. This one is way cool. It lets you put in a numerical argument that causes whatever you type next to repeat by how many times the number you put in would require. For instance, c-u 4 c-n makes you move down 4 lines. Emacspeak uses the argument prefix to make changes global instead of local. For instance, the c-e c-a combination we used earlier only makes auditory icons turn on locally. To turn them on globally, type c-u c-e c-a and you have them on everywhere in Emacspeak.
- c-c: This prefix is a generic prefix which many other extensions of Emacs use for functions specific to their particular modes.
+ Modes: Emacs has major and minor modes. No, music lovers, this has nothing to do with Ionian and mixolidian. Modes are, for lack of a better word, behavior parameters. Each time you change mode, you make Emacs behave differently. The hotkey combinations change their function in subtle ways that are in the context of whatever mode you switched to. Each extension of Emacs often has one or more major and several minor modes that alter its behavior according to what that extension helps you accomplish.
+ Buffers: Buffers are regions Emacs uses to separate information.
They are not physical and should not be confused with windows though
they do many of the same things you are used to thinking of when you
think about what a window does. The Emacs user's manual
has [[http://www.gnu.org/software/emacs/manual/html_node/emacs/Buffers.html][a
very good explanation]] of what they are and I suggest you explore
them both in this link and using the emacs tutorial so as to familiarize yourself with the concept. To get a list of buffers similar to a "Window list" or "applications list" which is what you may be used to in Windows land, type c-x c-b. Just arrow up and down and press enter on the one you want to switch to.
+ Windows: These are physical regions of the screen used to display
information. For instance, you can have the buffer containing the
document you are editing split into two windows with one showing
where you are typing and the other one showing another part of the
same document. The Emacs Manual has [[http://www.gnu.org/software/emacs/manual/html_node/emacs/Screen.html#Screen][an excellent section]] on how the
screen is divided in Emacs. It goes into more detail and also
explains what frames and rectangles are in the Emacs context.
Now that these are out of the way, Let's go back to talking about help and reading it.
*** Using the menu bar to access help
This is as good a time as any to formally introduce the menu bar.
Emacs has one that will be easy for Gnome, Windows or Mac users to
navigate without any problem. Hold down the alt or meta key as Emacs
calls it and press your grave button which on the U.S. keyboard, is
located to the left of the number 1. Some folks call it the back tick.
If this doesn't work with your particular keyboard, try hitting f10.
The menus are file, edit, options, buffers, tools and help. To go
from one to the other, use your up and down arrows. To select one,
press enter and arrow up and down through its options. When you find
the one you want, press enter. If you make a mistake and want to
start over, press c-g or control g which is the Emacs quit command.
It is very similar to what you are used to but with a slight variation
in the actual menus themselves since you don't use right and left
arrow. Sometimes there are more menu items than this when you are in
certain pluggins or modes, as they are called but these which I listed
here are always present. You will see this for yourself when we
explore some of the modes we'll be covering in this tutorial. The help menu is the one you want for this section so press enter on it when you hear it.
The items in the help menu are as follows:
+ Emacs tutorial
+ Emacs tutorial change language
+ Emacs FAQ
+ Emacs news
+ Emacs known problems
+ Submit Bug Report
+ Emacs psychotherapist
+ Search the help files
+ Key Describe
+ Read the manual
+ Find Emacs Packages
+ External packages
+ Getting new versions
+ Textual links about copying, redistributing and such.
The ones to look at first are the "Emacs tutorial", "read the manual"
and "key describer". Each of these has a hotkey bound to it. I
suggest you learn these as you will probably be using the help system
a lot at first. In truth, you will never stop using the help system
since Emacs has so many features and so much functionality that you
will discover new stuff all the time for which you'll need to read the
help files. To get back to your work, just open up the buffer list with c-x c-b and arrow up and down till you get to the buffer containing what you were doing and press enter. If you want to get rid of the help buffer you were reading, kill it by typing c-x k and pressing enter.
*** Hotkeys for getting help.
If you find the menu bar cumbersome, and, believe me you will eventually, here are the hotkeys for accessing help from Emacs. Note that they all have the c-h prefix:
- c-h i: Read the Emacs manual using info. Info is the system Emacs
uses for its documentation. It resembles webpages complete with
nodes and hyperlinks. You type enter on a link to follow it, n for
next node (chapter), p for the previous one, and space bar to move
forward a page inside the node you are reading. You can also access
the info system by pressing m-x and then typing info after which,
you press return.
- c-h t: Emacs Tutorial. This is a must for anyone learning
Emacs. In fact, I'm going to recommend that you follow it at first
opportunity since it is very well done and will show you how to move
around in a file. If you are going to do this, however, skip down
to the section describing what to expect during your first launch of
Emacspeak since its unique interface sometimes makes it easy to get lost for some people the first time
they pull it up.
- c-h cap M: This lets you get to a help file that has a list of all the
hotkeys for a given mode. Useful for when you get tired of the menu
bar. The nice thing about this feature is that each hotkey's
function is presented as a hyperlink for you to press and read more
about it if you choose.
- c-h b: More or less the same as c-h cap M but much more concise for
when you just want a quick reference.
- c-h k: Key describer. Just type this hotkey combination and then, at the prompt key in a hotkey you want described and it will tell you all about it.
- c-h a: Appropose. Fancy name for "I want to do x, y and z but I
have no idea what to push to do it. Give me a list of possibles."
** What is Emacspeak and where to find the user's manual.
Emacspeak is an extension of Emacs written by Dr. T. V. Raman, a blind computer scientist currently working for Google. It turns it into a self-voicing solution that renders it's output in spoken form in a way that makes it easier for interacting with it without vision. It added a lot of commands and changed the behavior of Emacs while doing it so seamlessly that, you don't realize that you are using emacspeak features which are not present in an unmodified Emacs. It is integrated into Emacs itself to such an extent that people who use it tend to blur the line between the extension and the application. While you are learning however, it is important for you to keep the two apart. If you learn your way around Emacs you will pick up things on Emacspeak little by little. Once you have the basics of Emacs down and can move around in and edit files, manipulate the contents of a directory and do a few other things, you can focus completely on Emacspeak and unlocking its more complex and delightful secrets. This learning strategy has worked out rather well for me and it is the path I suggest for someone who is completely new to Linux and has a strong background in Windows and the screen reader solutions there. The reason for this is that both will require you to learn some new concepts that are tied to how the application and the extension work under the hood. This is very important since customizing often involves tinkering with some of the stuff under the hood which can be a bit foreign to the windows user. The truth is, Windows has spoiled us by making so much of what goes on under the hood hidden from us and automated. A powerful tool like Emacspeak can be a bit daunting at times for someone used to all the pampering of the Windows environment where the software developers and distributors take it upon themselves to think for you and lock you away from the code. Sometimes, the help files themselves are a bit hard to follow without first learning this under-the-hood knowledge so, learning a few things about Emacs will help you more easily learn how Emacspeak does what it does for you.
*** Emacspeak and getting help
Emacspeak also has a user's manual which can be accessed using the hot key combination c-h c-e. Again, that's control h and control e. I will gradually stop explaining this as the tutorial progresses so, make sure you learn what is meant by this naming convention.
The Emacspeak user's manual contains many useful and practical tips for getting the most out of it so, make sure you read it. It is not set up like the info pages so, this is a great time to really learn how to move around in a file in Emacspeak. While browsing this file, you will notice that some things are spoken in a lower voice. This is how Emacspeak tells you that you are on a link. You can press enter on any one of these links and get more information on them. At the end of each, there is a "back" link which, when you press enter on it, will take you back to the Emacspeak help page. There is an online version of the manual you might enjoy browsing. Here is its link:
[[http://www.cs.cornell.edu/home/raman/emacspeak/info/emacspeak.html#SEC_Top][Emacspeak User's Manual]]
Another resource for you is the Emacspeak FAQ. The FAQ can be found by typing c-e cap F. Note that this is a capital f.
** Navigation
Ok, now that the help system has been introduced, it's time to learn
how to move around a large bunch of text. This is where we learn some
more hotkeys. Refer to this section frequently in your adventures
with Emacs since these keys are valid from virtually any environment
in Emacs. You need to learn these because it is as important to know them as it was for you to learn all the key combinations Jaws, Window Eyes, or NVDA and their friends had you learn in windows to move around. If you just stick to the arrow keys, (which, of course, you can), you'll be at it for years and years and wind up giving up. so, here we go:
*** Movement commands.
Where c- stands for control m- stands for meta or alt and s- stands for shift:
note: If you get stuck and just want out of Emacs altogether, type c-x and c-c.
| Element | backwards | forwards |
|top/bottom of Entire buffer | m-s-, | m-s-.
| screenfull/page | m-v | c-v |
| line | c-p | c-n |
|Sentence|m-a|m-e|
|Line Beginning/end|c-a|c-e c-e|
| Word | m-b | m-f |
| Character | c-b | c-f |
Daunting? Well, at first glance they can be but, here's a mnemonic device for you:
+ previous, next; back and forth: Previous and next line, back and forward word and char.
+ The c-hick is smaller than its m-other: Meta makes analogous control key combinations do bigger things. m-f moves forward a word where as little c-f moves forward a character. Get it?
+ A beginning is usually to the left of the end: c-a is the beginning of the line and c-e is the end of it. (Note, Emacspeak uses c-e as a prefix, so you have to hit it twice to make it work right.)
And, c-v and m-v are kind of to be learned on your own. It's not because of any special reason other than that I haven't been able to come up with anything clever by which to remember them. If you can, please let us know and we'll stick it in here. v stands for vertical is about as far as I've gotten.
*** Reading Commands
Here are some basic reading commands. Please note that this is not an exhaustive list. There are many more. Use c-h c-e to access the help file containing them. These let you read parts of the screen without moving your cursor:
|element|previous|current|next|
|Buffer| -- | c-e B|-- |
|window|c-e c-p| |c-e c-n|
|line|c-e up arrow|c-e l|c-e down arrow|
|word|-- |c-e w|-- |
|Char|-- |c-e c| -- |
*** Other commands
Commands for moving through and reading files are not the only commands you will
need in Emacspeak. Here are a few other useful commands for you.
Remember, if you don't feel up to memorizing them yet, you do have a
nice menu bar to fall back on if you need it which you can reach
through alt plus grave or f10. Here we go:
+ Open a file: c-x c-f :: This command will put your cursor after
the ~/ which starts all file and directory names inside your
home folder. If you want to create a new file, simply type in its
name and press enter. If you want to "visit" a pre-existing file,
either type its name or arrow down through the list of files and
directories in your home directory and press enter on it when you
hear its name spoken.
+ Save your current file: c-x c-s :: Works very much like a control s in Windows or Gnome. If you have auditory icons turned on, there's a neat little bleep unique to this key binding's function.
+ Save as: c-x c-w :: The w stands for "write" a file.
+ Buffer list: c-x c-b :: This is very handy. It will give you a list
of all the buffers you have opened during the current session. Use
it like you would a task bar or window list. Arrow through the
different choices and press enter to change the focus to the one you
want. An example of when this is useful is when you are browsing a
help file and then want to get back to where you were. The buffer
list will get you there. A slightly different way to accomplish
this is through c-x b as well.
+ Kill buffer: c-x k :: This has a clumsy equivalent in alt f4 in
Gnome and Windows environments. You kill the buffer you are on and
it no longer becomes accessible to you for anything.
+ Search forward and backwards: c-s and c-r respectively :: Highly useful commands. These will let you type in a
string and actually start jumping you to the place you want as you
are typing. Press an arrow key when you think you are at your
destination and read the line with c-e l to confirm. I love these
commands because they help with rapid navigation in a file or buffer and work absolutely everywhere including shells and directories.
+ Move to other window: c-x o :: Some modes will split your screen
into several regions called windows and display either part of
your current buffer or other buffers in those windows
simultaneously. The Emacs Code Browser is a good example of a
mode that does this. The c-x o command helps you move your
cursor to these different windows.
+ One window only: c-x 1 :: if something has split your screen into
more than one window as described in the previous command, the
c-x 1 will get rid of those other windows and only have one
appear on the screen. The data those other windows held is still
there, it's just not displayed.
+ emacs command: m-x :: Everything bound to a hotkey is actually a
function or program which you can invoke directly by name. For
instance, c-h i pulls up the help system of Emacs. To invoke it
directly, type m-x and, at the prompt, type info. You can launch
lots of modes or applications from the m-x prompt. It's even
browsable. Have a look with your up and down arrows. When you get
tired of it, use the following command I will show you.
+ quit: c-g :: This command works about like the cancel buttons you find in
Gnome and Windows. It aborts just about anything.
+ Exit Emacs: c-x c-c :: This is very important! It does what you
would expect. Before Emacspeak goes away, it will ask you if you want to save the file you have been working on if applicable and it will always ask you if you want to kil the "active processes" that exist. You will need to actually type out yes on that one not just y.
* Configuration
Configuring Emacs and Emacspeak involves several things. You may want to add more extensions, change how it talks, and change how it behaves in certain situations. You might also want to change how it loads when you launch Emacspeak. We will discuss all of these next.
** Setting up your environment
This section talks about how to set up how Emacspeak speaks to you and how to make it present information for you in certain ways. Before you can customize it though, you need to edit the shell script that launches Emacspeak found in /usr/bin/emacspeak. To do this, type the following at a terminal:
#+BEGIN_EXAMPLE
sudo gedit /usr/bin/emacspeak
#+END_EXAMPLE
Once that's done, arrow down till you get to the part that begins to talk about exporting to unary mode. You need to get rid of those lines. Do this either by commenting them out with a # sine or by just deleting them altogether. Unary mode isn't necessary for Emacspeak anymore and it will slow your system down some. Next, find the line that begins with execute emacs -q -l followed by a path to the emacspeak file in the /usr/share/emacs directory. You need to get rid of the -q flag since this will prevent you from being able to customize your Emacs at all. If you want to play it safe, comment the line out then select, copy and paste a copy of it underneath and just delete the -q from that one. When you are done, save your changes and you are ready to customize.
*** Voice rate, punctuation level and key echo
Hopefully, your distribution came with emacspeak more or less
preconfigured for use without a setting turned on that totally drives
you crazy. Even still, you will want to learn to customize it.
Honestly, the fastest way you will find to customize Emacspeak is to
edit your .emacs file (it's like an ini and a config file rolled into
one for Emacs), and put your settings there. This, however, will
involve learning some Emacs Lisp, the language Emacs is partly written
in, and can be a bit heavy going for a new user. Fortunately, an alternative method exists.
** Customizing Emacs using Easy Customizations
As I mentioned previously, the fastest way to customize your Emacspeak installation is by editing your .emacs file and setting all sorts of variables and instructions there. This requires that you either find a code snippet to paste into it and hope that the person who claims that it works is correct or learning Emacs LIsp yourself. A much easier, if time consuming alternative is to use the Easy Customizations section of Emacs to do this. You get there by typeing m-x customize or by hitting c-e cap
b from anywhere within Emacs. c-e cap c takes you directly to the Emacspeak section of the truly
massive customizations area. It's hard to explain how this thing
works. You get a page with links on it representing "groups".
Pressing enter on these groups takes you deeper into the section in
question. You then arrow around to find the settings you want to save
and do it either by hitting space bar in certain areas, setting things
to t (on) or nil (off) in certain places or, in still others, by
typing numbers or letters and things. Each group is read in a lower voice by Emacspeak indicating that you
can press enter on it to interact with it. Most of the buffer is read-
only except for the places which are usually at the end of lines where
you can add values. You will use c-e c-e (move to end of line) a lot in there. Another
handy thing to get real familiar with quickly is c-s and c-r. c-s is
search forward and c-r is search backward. Both will start moving the
cursor as you type until you land where you want to be. Hitting your
arrow keys makes the search entry field go away and lets you interact
with Emacs at whatever point you told it to take you to. It's the
only sane way to navigate this area once you know what you are looking
for. The important thing to search for is "save for future sessions". It
should be obvious what that does. Please be prepared to spend a lot of time familiarizing yourself with this part of Emacs. Once you get the hang of it, though, it's pretty quick especially if you use the search functions described above.
Here's what to expect when you launch it for the first time. To access the Emacspeak-specific section of the rather large customizations area, type c-e c- cap c. You should find yourself in the customizations buffer. type c-n a bit to move
down a few lines. Listen carefully to the instructions to this part
of Emacs as they are pretty self-explanatory. Each item in brackets
can be interacted with either by pressing enter or by typing in the
field to the right of it. Use your movement commands liberally. To
change speech, the [tts] group will be the place to go. Once you are
done with your customizations, go to the top of the buffer with m-<
and arrow or c-n down to the line that contains the option to save for
current or future sessions and the exit button. Or, you could cut right to the chase by typing c-r to search backwards and then typing save for future sessions.
If you would like a much better and more in depth explanation of this feature of Emacs, I urge you to visit the [[http://www.gnu.org/software/emacs/manual/html_node/emacs/Easy-Customization.html][chapter dedicated to Easy Customizations]] in the Emacs Manual.
** Configuring Emacspeak on the fly
If you don't want to mess around with the Easy Customizations section
just now and just want to do some on-the-fly changing, here are some
hotkeys that you can use to do this. Note that putting c-u before all of these makes the changes Emacswide. Otherwise, you'll change Emacspeak's speaking behavior local to your current buffer.
+ Turn off verbal or "split" capitalization announcement: c-e d s
+ Turn on capitalization announcement by pitch: c-e d c
+ Turn on capitalization announcement with a short click (my favorite): c-e d cap C (the c is capitalized on this one)
+ Change punctuation level: c-e d p and then type none, some most or all whichever you want.
+ Change speech rate: You can do this in two ways.
- Preset levels: c-e d and then any number from 0-9
- Words per minute specification: c-e d r and how many words per minute you want. I keep mine at 350 so, I typed c-e d r 350 and hit enter to do this.
*** Audible Icons
As mentioned before, audible icons are sounds associated with behavior such as pulling up menus, toggling something on or off, moving to the beginning or end of a file and changing screenfuls of ext with c-v m-v. If you used Jaws in Windows (lots of folks do since at the time of this writing, it's the most popular screen reader in the most popular operating system), you know this concept by the name of Sound Schemes. to turn on these audible icons, use c-e c-a. to turn them on globally, type c-u c-e c-a.
*** A sample of a .emacs file's contents
Earlier, I told you that the easiest and fastest way to change your settings is by changing what your .emacs file contains. Here is a snippet from mine which makes your caps indicated by a clink, your speech rate at 250 wpm, your punctuation level most, and word and char echo off but line echo on. Copy and paste this exactly as I have it here and you should be ok. If you want word echo on instead of line echo, change the t to nill and vise versa for the applical line item.:
#+BEGIN_SRC emacs-lisp
'(emacspeak-character-echo nil)
'(emacspeak-line-echo t)
'(emacspeak-word-echo nil)
'(espeak-default-speech-rate 250)
'(line-number-mode nil))
(dtk-toggle-split-caps t)
(dtk-toggle-allcaps-beep t)
#+END_SRC emacs-lisp
** Adding pluggins or extensions
There are two ways to add extensions to your Emacs which we will discuss. There are more but these are the easiest. Remember, this is for newbies to learn Emacspeak. These two ways are through the [[http://www.nongnu.org/synaptic/][synaptic package manager]] and through the Emacs Lisp Package archive or [[http://tromey.com/elpa/][Elpa]] as it is called for short. The next two sections will show you how to add packages and extensions to your Emacs using these two solutions.
*** Adding packages through Synaptic
Many of the extensions that have been written for Emacs can be added through Synaptic inside of Gnome. Just bring it up and type control f for find and type in emacs. Press enter and wait for a bit and it will only show you the packages which are related to emacs. Tab a few times till you hear Orca say "s column header". Now, arrow down to go through the list. Arrow left and right to move from column to column such as package name, installed version, latest version and description. When you get to a package you want, mark it by typing control i. When you have marked all the ones you want, press control p to apply changes and tap to apply and press enter. If you need more help than this using the Synaptic Package Manager, follow the link provided in the previous section which will take you to its homepage where you can learn more about it
** Using Elpa to extend your Emacs
Elpa is a system Emacs uses for downloading and installing extensions. Some are very large and include several modes while others are small and may only consist of a minor mode. As you become more proficient in Emacs, you will be in a better position to pick which packages you want for your machine. In order to make Elpa available, you will need to paste a bit of lisp code into your scratch buffer. Here is the code. Cut and paste this into an empty text file for later use in case you ever have to reinstall your Emacs:
#BEGIN_SRC emacs-lisp
(let ((buffer (url-retrieve-synchronously
"http://tromey.com/elpa/package-install.el";)))
(save-excursion
(set-buffer buffer)
(goto-char (point-min))
(re-search-forward "^$" nil 'move)
(eval-region (point) (point-max))
(kill-buffer (current-buffer))))
#+END_SRC
Ok, here's what you do:
1. Inside gnome, open up the text file you pasted this into with gedit and copy the code into your clipboard.
2. Get out of gedit and go to a gnome terminal with control alt t.
3. Kill orca with orca + q.
4. Type emacspeak and press enter to bring up emacspeak.
5. Get to the scratch buffer with c-x c-b and arrow keys, pressing enter when you hear it mentioned.
6. Press m-> to get to the bottom of the buffer.
7. Bring up the edit menu by first hitting f10 to bring up the menu bar or alt+` whichever you prefer and then arrowing down to edit. Press enter here
8. First option should be paste. Arrow up and down a couple of times because you don't want to confuse it with Paste from Kill Menu. Once you have established that it's paste, press enter.
9. Your elpa code should be there now. Go to the bottom of the buffer with m-> an press left arrow till you are placed just after the last parenthesis.
10. Press c-j to evaluate or run the code. You will then get a new buffer which is the elpa package list come up after a few moments.
Once you have elpa installed, just arrow up and down through the list of packages and type i next to the one you want to install. Do that till you have made all your choices and then type x to have it download and install them. When you are done, type c-x c-c to close Emacs and then bring it right back up again either in console or in gnome according to your preference and you should have the new packages you wanted installed and ready for use.
I am going to recommend that you install three packages right off the
bat. These are Facebook, twitter and w3. Place an i before the name
of each of these as instructed above and then, after the last
selection, press x and give Elpa a few moments to install these. The
first two are self-explanatory. The third package is a web browser
for Emacs.
* Putting it to use.
Now that we have our emacspeak all set up the way we want it, let's
make it do something for us. The following sections can be read
independently. They have been written so as not to build on one
another too much. This way, a newcomer to Emacspeak can pick what
they want to accomplish first to get their feet wet. Remember to
refer to the hotkey list described in prior sections for help
navigating them. I suggest you try every one of these at some point. You will then get a very good idea of the potential emacspeak has. Remember to make heavy use of the info pages and the key describers discussed in the section on getting help. Also, never forget that Google is your friend. Emacs runs primarily on Linux and Unix systems. The internet began its life on Unix systems for the most part and Linux grew up with the Internet in its modern form and is available in dozens of flavors each with their own web pages and documentation, forums, mailings and so forth. What this means to you is that there are tons and tons of web resources for Emacs for you to consult. Use them to the fullest extent possible.
** First Launch of Emacspeak
Let's back up a bit and describe what you can expect when you launch Emacspeak for the first time. The very first time you launch it from your console or terminal, you will hear e-speak load up first and then Emacspeak will tell you that it is "fully operational" and all its "circuits are working perfectly." You will then find yourself on a screen that is the Emacs welcome page. Move around on it a bit with c-n and c-p. You will hear it announce the Emacs Tutorial and link to Browse the Emacs Manual very early on. If you want to take this moment to explore these resources, by all means do so. You may find it very fascinating and enjoyable to explore this new application in as safe a manner as this. Whenever you are done exploring Emacspeak and just want to quit, type c-x c-c. You will get a prompt that says:
"Active processes exist. Kill anyway?"
type "yes" all the way out and, of course, without the quotation marks I'm using for grammatical effect. You will then find yourself back at the command prompt where you started.
** Additional notes
Please note that I always show you how to use Emacspeak from a console
and not from Gnome. The reason for this is that at the time of this
writing, Orca and Emacspeak don't work well together due to some snafu
with the gtk+ support Emacs has freezing at-spi somehow. A partial
work-around is to bring Emacspeak up in xterm which Orca currently
doesn't read but, it will still make Orca take a while before coming
back up when you alt tab or control alt right arrow out of Emacspeak
and into something else. The lock-up can be avoided by putting the
-nw switch in when you bring up Emacspeak but, for some reason, the
meta key is unassigned in this launch and this causes you to have to
use escape as a prefix for everything you normally hold down the meta
key for. I personally find it annoying and don't use it this way
because it isn't very efficient. You may not find it so in which
case, feel free to pull emacspeak up in xterm. To put in the switch I mentioned, bring it up like this:
1. From inside gnome, press alt f2 to be prompted which application you'd like to run.
2. At the prompt, type xterm and press enter.
3. You won't hear anything other than, perhaps the window title and Orca telling you this place is inaccessible. Hopefully, you have sound icons turned on in gnome so that pressing down arrow gives you a sort of tom-tom drum sound telling you that you are at the bottom of the terminal window.
4. Type emacspeak -nw and press enter.
5. Begin using Emacspeak as normal.
Don't use gnome terminal unless you are turning your orca off because they will both talk at once. If you are going to do that, kill orca while you run Emacspeak and don't bother with the -nw switch. I've used Emacspeak this way a couple of times but I like having Orca around for x-windows stuff so, I run my Emacspeak in a virtual console, tty1 to be exact. I also like to use speakup in the pure console environment so, I have tty2 logged in and brought up as well with speakup not toggled off in it. I typically have a Gnu Screen session going in there so I can multitask inside the console but that is another topic for another day. Bottom line is, don't ever ever let one good tool cheat you out of being able to use another. Avoid the silly romanticized emotional loyalties people tend to develop for doing things one way and with one thing. Watch out for the pernicious tendencies people have of turning their noses up at perfectly good software just because they don't like the interface, don't believe in how the developer deals with his code or other such foolishness most end users could care less about. If you are using Emacspeak, it is because you are visually impaired. This means that your options for what kind of software you can use are limited enough as it is. Don't hamper yourself further by turning your back on any tool you can use to get the job done. We just can't afford that kind of thinking. Use the best tool for the job as much as time, resources and inclinations allow and leave philosophy and idealism to people like Plato and politicians. Ok, I'll get off my soap box now.
Bringing up Emacspeak in the console is nice because you can still have speakup running though in the background and it can be called upon to read the screen in a traditional screen-reader manner with the number pad. To keep speakup from talking over emacspeak, simply hold down the numpad insert and press numpad enter. To make it speak the screen as it changes again, just press that key combination a second time and it'll toggle speakup back on for you. All right, now, without further adieu, let's get started!
* Manipulating text
Emacs is the king of editors. Yes, I know that sounds really pompous and I suppose it also sounds rather silly but, honest, it's true. No other editor can do as much as Emacs can in as efficient a manner and with as much room for customizations and extensions as this 30 something year-old editor. The next few sections will feature step by step instructions on creating files which are, at the core, just text files but that do many different things. Here we go!
** Your first text file
In This section will show you how to create and edit your first plain
text file. If you are used to windows, then you are probably used to
people looking a scance at plain text since there are so many word
processors and other types of solutions for making text look and
behave a certain way. In Windowsland, you have .rtf's, .doc's,
.wpd's, .pdf's, and all sorts of other extensions denoting all sorts
of files which can only be read by one sort of program or changed by
one sort of program. The humble .txt file is seen as unsophisticated.
It isn't and these programs use plain text too but with tons of markup
which they hide from you in all sorts of convoluted ways that take
away your control of the file. In Linux, however, plain text is used
extensively and markups and such are always available for you to see
and understand due to the prevalence of free software and open source
thinking. The text file can be put to many uses. We'll really see
one of these uses when we write our first webpage using Emacs's
org-mode but, for now, let's just make a text file. It will get you used to editing and movement commands within Emacs.
From the command prompt. do the following:
1. Make a directory from which to work. So type this:
#+BEGIN_EXAMPLE
mkdir learn-emacspeak
#+END_EXAMPLE
2. Now, move to it in order to work from there by typing:
#+BEGIN_EXAMPLE
cd learn-emacspeak
#+END_EXAMPLE
3. Now, we can begin. Turn Speakup to quiet mode by holding down the numpad insert and pressing enter. Espeak will say "You turned me off!" It will hang around in the background and can be accessed using your number key pad but it won't announce changes in the screen anymore. If you just want Speakup out of the picture, press print-screen and it wil kill it. Press print screen again to bring it back to life.
4. The moment of truth is upon us! We're going to bring Emacspeak up with a text file. You do this by typing the following into a command prompt in the console:
#BEGIN_EXAMPLE
emacspeak firstfile.txt
#+END_EXAMPLE
Emacspeak will come up and you will be in an empty file buffer. Type a few lines. For instance:
#+BEGIN_EXAMPLE
Mary had a little lamb
Whose fleece was white as snow.
And everywhere that mary went,
The lamb was sure to go!
#+END_EXAMPLE
Use the movement keys taught to you in prior chapters of this tutorial to move around this file. Move around by character, word, and sentence. If you decided to type many more lines, you can move by screenful by scrolling vertical with c-v and m-v. Here are a few editing commands for you:
+ Delete character: c-d
+ Delete word: m-d
+ Delete or kill line: c-k
+ Paste what you just deleted back into another part of the document: c-y (y stands for yank)
Other exercises:
- Press m-< and m-> to go to the top and bottom of your file.
- Use c-e B to read your entire buffer. it will ask you if you want
to read the whole thing or read from start to point or from point to
end. It's pretty self explanatory. To use fewer keystrokes, you
can use c-e n to read from point forward.
- Press c-n a few times to go to a line of your file further down and practice reading the prior line with c-e up arrow. Read the current line with c-e l. Find out the current line number with c-e e-l.
- Explore the menus in plain text mode to find other functionality.
One thing to note is that Emacs has word wrapping set to off by
default. If you are going to write a lot of pros, you'll want to
access the options menu and arrow down to "Auto fill in text modes"
and press enter. Your lines will wrap from that point on. Don't get
taken in by the actual word wrapping features because they just
wordwrap for visual effect. Emacspeak won't be fooled and will treat
your text as single line paragraphs.
When you are done with your file, Press c-x c-s to save your changes.
*** But wait! What about spell checking?
Ok, so now that we have finished typing our text file and we've saved
it, we don't want to just leave it like that. There might be typos in
there! Or, you might have just slipped up and forgot to double a
consonant, lengthen a vowel or something like that. To remedy this
situation, Emacs has a spell checking mode you can turn to. From
anywhere in your file type m-x ispell-buffer. Emacspeak will read the
sentence or line of any mispelled word and use a lower voice to
pinpoint the misspelled word for you. You are then given a list of
choices to choose from. It's pretty straightforward. If you get
stuck, just type a question mark and you will get a nice help file
spoken telling you what to do. Once you are done spellchecking, hit
c-x c-s to save and you are set.
*** Visiting files
To edit a new file from an already running emacs session or to open a file you had edited previously, type c-x c-f. YOu will be placed after the ~/ which tells Emacs to visit or create a file in your home directory. If you are pulling up our little text file at some future point, we would type learn-emacspeak/firstfile.txt. Of course, there's also completion.
If you don't remember the exact string to type to get to a file, type the beginning of it and then tap to get emacs to generate a completion list. Then, type page up to put you into the completions buffer where you canarrow up and down to pick your completion. Sometimes, you get more than one file at a time on a line so use left and right arrows to get to other files on such lines. That's all there is to it! You now know enough to get you started writing text files. Use that menu bar when you get stuck and then learn those hotkeys by browsing the help files as you go along.
** Let's make a webpage!
I am now going to teach you how to write your own homepage using Emacspeak without knowing a single solitary lick of css or html code. Your homepage wil be accesible, structured and usable with just about any browser out there. You'll be able to save it to a thum drive and put it onto any machine you use regardless of platform and it will work for you no matter what screen reader you use. And, my friend, we will do this in just a few short minutes. Don't believe me? Watch and learn!
We are going to use a built-in mode of Emacs called org-mode. It is used for all kinds of things like planning agendas, scheduling, writing notes and authoring. You can take what you write in this mode and have it spit it out to a structured ascii text file, an html file, a LaTx file a pdf file and, of course, an html file which is what we will be doing. Let's get started!
Note: You can get more information about org-mode and all its many
uses by browsing the online manual by following this link: [[http://orgmode.org/manual/index.html][online
version of the Org-Mode Manual]]. If you are in Emacs, you can also, of
course browse this documentation using info.
From the command prompt. do the following:
1. If you haven't already, make a directory from which to work. So type this:
#+BEGIN_EXAMPLE
mkdir learn-emacspeak
#+END_EXAMPLE
2. Now, move to it in order to work from there by typing:
#+BEGIN_EXAMPLE
cd learn-emacspeak
#+END_EXAMPLE
3. Now, we can begin. Turn Speakup to quiet mode by holding down the numpad insert and pressing enter. Espeak will say "You turned me off!" It will hang around in the background and can be accessed using your number key pad but it won't announce changes in the screen anymore. If you just want Speakup out of the picture, press print-screen and it wil kill it. Press print screen again to bring it back to life.
4. Type emacspeak myhomepage.org at the command prompt and press enter.
You are in an empty buffer in Emacs running org-mode. Before we write
a single line of text, let's turn autofill mode on by going to the
options menu with either alt plus grave or f10 and arrowing down to
it. Autofill should be one of the first things you hear while
arrowing down. This will word wrap our lines for us. Now, on to our
homepage!
Let's first create the structure of our page. We will use 3 headings, personal, technical, and other. We can do this in three ways.
+ Using the menu bar: Press f10 or alt+` to bring up the menu bar and arrow down to org mode's menu. Press enter. From here, arrow down to "new Heading" and press enter. Now, type your heading name and press enter.
+ With a hotkey: Press c-j and then type your heading name. When you are done, press enter.
+ Markup tags: This is my favorite way as I can do it quickly and on the fly. Type an asterisk and then space twice. Then, type in your heading name and press enter.
Pick a method and create the heading names I assigned you above.
*** Fil in the Sections
Ok, now, we flesh out our page. Using your arrows or c-p and c-n, get to the first one called "personal." You will notice that it is preceeded by an asterisk. Type c-e c-e to get us to the end of the line and press enter. Now, type something brief to remind yourself of what's in this section. Something like this:
This section contains my personal information links such as my e-mail page, my bank's page and my social accounts pages like Linked-in, twitter and Facebook.
Press enter twice and let's get ready to make our links.
*** Creating Links
As in the case of headings, there are three ways to put links into your homepage with org-mode. Really, there's more than this but, we are trying to keep it simple so we will restrict ourselves to three.
+ Using the menu bar: :: Again, we hit f10 or alt grave and arrow down to org's menu and press enter. Then, we arrow down to "hyperlink" and press enter again. We are now in a submenu. Arrow until you hear "Insert hyperlink" and press enter. From here, we have a list of different sorts of links to choose from. If you explore a bit, you will find http, https, ftp, sendmail and many more which are far too many to list here. Arrow down to http:// and enter the url of the page you are linking to.
Example:
#+BEGIN_EXAMPLE
www.vinux-project.org
#+end_EXAMPLE
Press enter again and you are at a point where you can enter a description. This is where you enter the text you want to hehar telling you what that url is to. Along the same vein as our example: Vinux home page.
+ A hotkey combination: :: To add a link using hotkeys, we use the c-c prefix and then c-l. So, c-c c-l and we are in the list of url types again. Proceed as outlined above at this point.
+ Using the link markup codes: :: Again, this is my personal
favorite since I don't really like to interrupt my typing to mess
with menus and lists and things. To add a llink this way, we put
in square brackets. This is a square bracket: [. You want two
left square brackets one after the other. Then we put the url
in. Next, we put in a right bracket to close the pair containing
the url and follow it with a left square bracket. Here, we type the link's description. When the description is finished, we put a right square bracket to close the description field and another to close the link addition. When you press enter now, you have a link in your page! You can test the link by arrowing up to it and noting that Emacspeak speaks it in the lower voice designated for links. You can also follow the link. You can either do that with the menu bar or with the c-c c-o hotkey.
Here is an example of some links you can put in your page's personal section:
#+BEGIN_EXAMPLE
[[http://gmail.google.com][Check your Gmail account]]
[[http://www.twitter.com][Browse my Twitter page]]
[[http://www.facebook.com][My Facebook Page]]
[[http://www.sourceforge.net][Check my Source Forge Account]]
#+END_EXAMPLE
We can put the links in a list. It's really easy. Just preceed every line of your list with a plus sign and two spaces and then your beginning brackets or the insertion of the link and the links will be formatted into a list for you. Another way to do it is in a table. Each cell is separated by pipes or vertical bars. This is a pipe: |. For further guidance in creating tables in org-mode, consult the org-mode documetation online or thorugh the info pages. I like lists because they are easy to navigate with Orca and Jaws. Suggestions for the personal heading are a link to gmail.google.com, twitter.com and to your bank or something like that. Mine has my gmail, rfbd, my retirement account, and Linked-in since that's the only thing even approximating social networking that I do.
To go to each subsequent heading level in the file you are writing, type c-c n for next and c-c p for previous. Put your cursor at the end of each line with c-e c-e and press enter to get into where you can edit. You can fold headings where the stuff inside each of them is tucked away form view for you so the document tree is browsable and you can read the big picture. Makes authoring real easy, I can tell you. I'm using org-mode to write this tutorial, as it happens. To fold, you get to the line containing the heading and backtab. To unfold and read the heading's contents, press tab. When headings are folded, emacspeak will announce them as such in auditory icons with a sort of clicking or clapping sound. Try it out. It's pretty neat. when you unfold one, emacspeak will tell you that you can view the heading's children.
*** Exercise:
Now, it's your turn. Using the example above, fill in the rest of your personal links, put in some technical links like the Vinux homepage, the Emacspeak homepage, the Orca page ETC. Then, in your final heading, put in some other links of interest to you.
*** Exporting to html
So, now we have our homepage all written up and we are ready to export it. Again, you can do this with the org menu bar which you should know how to get to by now or by typing c-c c-e. You will be asked to enter a command. This is where you have the choice to export to all sorts of other formats. I'll let you explore those on your own. For now, just type h for html. YOu will be asked for a document title. Mine says, strangely enough, Alex's homepage. Title yours as you want and then press enter. Now, either open up another tty virtual console or alt f7 to go into Gnome and get to a terminal and navigate to your learn-emacspeak directory. Perform an ls command to list the files in the directory and you should hear the html file in there. To test it, launch your favorite browser and see how all the links work nicely.
Congratulations! You have just written your first webpage using Emacspeak. Pretty easy, right? To continue your learning experience, have a look at the org-mode documentation which you can get to through info or the org-mode menu and find out about all the other amazing things this litttle gem inside of Emacs can do for you.
** Let's write some code!
No document pretending to explain to someone how to use Emacs and
Emacspeak would be complete, in my opinion, without some instructions
on coding. Writing programs is one of Emacs' primary function among
many of its users. It's got a mode for just about every language.
For our purposes, we will use the c-mode which is the one for c and
c++ and other languages related to it. Don't worry if your language
is different, all of the concepts I wil explore in this brief tutorial
are common to all programming languages. I just happen to know c++
so, it's what I used. If you know Python, Perl, Shell Script, Java or
something like that Emacs has you covered. Just replace the .cpp
extension with the one corresponding to your language and chances are,
Emacs will have a mode for it pre-installed and come up for you in
that mode. Here we go:
If you write code, I'm going to assume you know how to use a command line. If you don't and you want to code in Linux, learn it as soon as you can. This section has the least amount of hand holding since, if you program, you need to be willing to explore more than your average user.
1. Make a directory called learn-emacspeak in your home directory.
2. Navigate to that directory from inside a console.
3. Toggle speakup off with numpad enter.
4. Launch emacspeak with the command emacspeak program1.cpp.
You are now inside an empty buffer in Emacs's c-mode. Emacspeak will act rather differently here than in other environments. Let's write a short program to demonstrate. We wil have some comments, some include or, what you might know as import statements, a fiew variables and a function. Notice how emacspeak's voice changes according to context. Write these lines exactly as shown here:
#+BEGIN_SRC c++
// This is a comment in c++
// It should be spoken in a monotone voice.
// You can't miss it.
// notice how it treats header file inclusions next
#include <iostream>
#include <string>
// Here's our function
int main ()
{
// Now, an object of type string and its initialization
std::string howdy = "Howdy, partner. This is emacspeak talking to you!";
int a, b, c; // Some variable declarations.
a = 1, b = 2, c = 3; // Assigning them values
std::cout << howdy << "\n Let's count to three: \n"
<< a << b << c;
// Print some text using console out in c++.
return 0; // We end our program.
}
#+END_SRC
To save our work, we type c-x c-s. Now, explore the file using c-p
and c-n and then go by words with m-f and m-b. Some new keys that are
specific to this mode are m-p and m-n which move you to the previous
and next statement respectively. Make some changes to the comments. Use c-d for character deletion, m-d for word deletion and c-k for deleting a whole line. c-y "yanks" the line back from being killed. It's Emacs talk for paste.
Have a look at the c-mode menus that are added to the menu bar by
hitting f10 or alt + grave. When you do the next exercise, notice how
they are different in the mode for your own language. The cc-mode has
a lot of other functionality but it is something best explored on your
own since it is only of interest to you if you code in c++ and
explanations of how that is done are way beyond the scope of this
tutorial. Another thing to look at is the list of hotkeys specific to
it by typing c-h m and then moving to the help buffer with c-x o.
Incidentally, c-h b will give you a more compact list of hotkeys.
*** Exercise:
From a command prompt, launch emacspeak with a new program in a language you are familiar with like Python. Explore how Emacspeak will talk in certain situations and with certain elements of code.
* Onto the wide wide world:
Emacspeak lets you have access to all elements of the internet. Whether it's e-mail, the web, chatting with Irc, social networking with Facebook and Twitter or reading your favorite newsgroups, it can all be done from within Emacs and Emacspeak has been written with support for this functionality. We will explore some of this in the next few sections.
** How about a chat?
Chatting with Emacspeak is truly a breeze. You won't believe how easy it is. The best way to illustrate that is to show you how you would chat on the Vinux irc channel. Here's what you do:
1. Launch Emacspeak from the command prompt with speakup toggled off by pressing insert + numpad enter.
2. Once it's up, press m-x and then type erc and press enter. Note the spelling, please, it's not a typo.
3. Answer the prompts such as the irc server, the port (best left as default) and then the nickname you want to log in complete with any applicable password. Press enter after each entry. This will get you onto the irc server from which you can then join a channel of your choosing.
Example:
|Irc Server|irc.blufudge.net|
|port|6667|
|Username|AlexM|
|Password| Gobbldy-gook|
Give it a few moments and it should tell you that you are on the server you chose. At this point, things get pretty straightforward because now, you can use the menu bar which can be reached with f10 or alt grave accent and arrow to the erc-mode menu and press enter. Choose an option such as joining a channel and then type in the channel you want to join. Another way to do this is to just type /join #channelName as you would in any other irc client. All the usual irc commands work here. the menu bar contains a few helpful shortcuts for when you don't know them but you can get away without ever visiting it.
*** Actual chatting tips
Once you have joined a channel, you will want to monitor it so you
know what people are saying. To do this, type c-c c-m. This will
monitor your current channel. If you have auditory icons turned on,
you will get a little sound preceeding every message someone types. To talk to someone, just type what you want to say and press enter. You'll hear a little ding if you have auditory icons but not the text you typed. To get past this, I usually turn on line echo locally with c-e d l.
You can have multiple channels at a time which you are monitoring. Personally, I have no idea why someone would want to do this but, I'm sure there are reasons out there for wanting to do this. If you have such a reason, each channel is in its own buffer. All you have to do to switch back and forth between channels you are on is to go to the buffer containing that channel and its conversations by hitting c-x c-b for the buffer list, arrowing down to the buffer in question and hitting enter on it.
Once you are done chatting, just use /leave to leave the channel you are on or go to the menu bar and find the leave command in the erc-mode menu. Once you've done this, you can either disconnect from the server or just kill the buffer you are on to stop your erc session. And that's all there is to it!
** Let's browse the web.
In the words of Emacspeak's author DR. T. V. Raman, "There are many solutions for browsing the web in Emacspeak neither of them entirely satisfactory." For most simple html and css pages, you can definitely have a very pleasing browsing experience with Emacs w3, the closest thing Emacs has to a a native browser. W3 doesn't have a Javascript interpreter so, anything containing javascript wil have to be accessed through other solutions. I will leave it up to you to explore these as this is merely a tutorial for getting your feet wet. W3 is a nice little browser which should fulfill a large percentage of your browsing needs. When it comes to more complex ones, however, you will really want to use another tool like Firefox through Orca. Since Orca currently has some slowness issues with regard to browsing, though it is good to know that, at least, for some of your browsing, you can indeed turn to Emacspeak and quickly go through web content. Here's how to get started doing this.
The plugin you will need is an emacs-native browser called Emacs w3.
It's not shipped with Emacs and its development has stagnated in
recent years but it's still a nice browser as long as you aren't
trying to nview web pages with lots of javascript. It's even got
support for aural css which is a rather neat feature. I'll et you
Google what this is since discussions on it can get lengthy. Anyway,
Emacs w3 can be put on through Elpa. Refer to the section in this
tutorial that discusses how to set it up and how to install packages
using this tool. For the rest of this section, I'm going to assume
that you followed these instructions and have Emacs w3 installed.
Another thing you may wish to consider is making it so that all html
documents which are rendered and pulled up as webpages instead of
source code get pulled up in w3 and not something else like Firefox.
This can be done in the customizations area. Type c-h cap B then arrow up to the appropriate subsection and navigate to where this can be done. The setting you want to change is labeled "browse url."
To bring it up, simply press m-x and then type w3. It should bring up a homepage for itself on the gnu.org site. To move around the web, here are the basic commands. Note the capitalization of these commands:
+ Moving forward and backward through the available links on a page :: tab and alt tab respectively
+ Selecting a link :: Enter or return as it's called hereabouts
+ Open a url :: c-o (this one should be no sweat)
+ top and bottom of document :: < and > respectively
+ Scroll down a page :: space bar
+ Scroll up a page :: del key
+ Reload page :: r
+ Back to your previous page :: cap B
+ Forward to the next page :: cap F.
+ View html source of the page you are on :: s
+ quit :: q
These commands should get you started. If you want more, remember, you always have c-h m to consult. It will bring up a list of all the hotkeys for you. There are many many more than the ones I mentioned. Also, please note that w3 has it's own menu bar. You should find it pretty easy to follow since it's very similar to other browsers' menu bars.
While you browse, Emacspeak will announce links in a lower pitch voice and will also modulate its voice depending on headings, quotes and other attributes of the document you are browsing. But, you may ask, are there no specific Emacspeak commands? There are many and I will let you explore them as you get used to Emacs itself. But, there is one priceless gem you will find quite useful which I will discuss in the next subsection.
*** Url Templates
One of Emacspeak's greatest strengths is how it presents you with information and how it allows you to interact with Emacs. It's not a screen reader in the strictest sense of the word because, it doesn't tell you what's on the screen but, rather, what you need to know to get the job done. All you have to do to prove this point is navigate with your numberpad if you have speakup set to off with numpad Enter. You will actually hear the physical layout of the screen whereas Emacspeak lets you have what you need when you need it. An outstanding example of this is the nice variety of Url Templates available. These are nice shortcuts to parts of long web pages that let you just get right down to business and not have to explore a page for a long time before arriving at where you want to go. Let's explore a couple of these.
Weather forecast
1. From anywhere within Emacspeak, press c-e u. This puts you at the top of a long list of templates.
2. Arrow down till you hear "Weather Underground." Press enter.
3. You are right at the edit field where you type in your city and state or country of residence to get a weather report. Go ahead and type it in and press enter. If you are in the U.S. you can also just type in your zip code.
4. Explore your weather forecast with the commands shown above.
Bookshare search:
1. Again, we type c-e u to bring up our url template list.
2. Arrow down to the bookshare search entry and press enter.
3. At the prompt, type in your search query and press enter.
4. Use the w3 commands to navigate the resulting page. When you are finished, press q to quit and you will be back where you left off before your browsing began.
*** Exercise.
1. There is a lot more to w3 and Emacspeak than what I covered here. Take a few moments and explore it thoroughly using the info pages, and by googling for more information online. Conveniently, there's a google search URL. Try putting it to use in this way and use your newfound knowledge to browse the resultant page.
2. Checking your gmail account. Use the url template for gmail which has been provided to check your e-mail in gmail through a browser session. Write a few e-mails yourself. This will teach you some new commands and show you how to interact with forms. If you get stuck, remember c-h b and c-h cap m contain key bindings which might get you out of a pinch.
** Sending e-mail
If you have a setup on your linux box that enables you to send and
receive mail system wide, Emacs can also be used as a mail client. If
you don't have this set up yet, I will warn you that it is a pretty
technical and advanced thing to do and will consume some time if you
have never done it before. You will need to acquire and configure
Fetchmail, Procmail and either Postfix or Sendmail. These are
programs that handle different aspects of sending and receiving e-mail
at a system level. Emacs then pulls the incoming messages from your
system mail box usually located in /var/mail/username whereX user name is your
login name on your machine. Outgoing mail gets sent out through
whatever you are using as an outgoing mail handling program such as
Sendmail or Postfix. There is a lot of information out there on the
net on how to set this stuff up on your machine. I suggest you have a
good look at it before attempting this.
Assuming you got it set up, here's how you send and receive e-mail
with Emacs. We will use the basic mail-mode. There are two other
more complex ones that ship with Emacs called Gnus and mh-e which can
be used for this purpose which you are encouraged to investigate.
There are others which can be gotten through synaptic or by visiting
webpages containing them on the net and installing them directly by
hand. Dr. Raman states in the user manual for Emacspeak that he is
partial to VM.
First, reading your e-mail is as easy as typing m-x
rmail. The interface is a bit old fashioned so you will get a ton of
header file information that most other clients just hide from you.
Use c-n to get past all of that stuff and you will get to the body of
your message. You can use either c-e B (note the capital b), to tell
Emacspeak to read the whole buffer from point to you or you can read
the mesage by screenful with c-v. m-n will take you to the next
messsage once you are done reading it. As usual, there's also a menu
bar that contains many more features and c-h b or c-h m will give you
more hotkeys if you don't want to fool with the menu bar. To exit the
mail mode, hit q for quit.
Sending e-mail is done by typing c-x m. You are at a" to:" prompt.
Just type the e-mail address of your recipieent and hit down arrow to
get to subject. Type in the subject and arrow down twice because
there's a line of dashes you have to get past. Type your message and
then c-c c-c to send it out and exit mail. Again, you are encouraged
to explore the other features by using the menu bar and the hotkey
lists.
* Retreat into your shell, why don't you?
Emacspeak grants you access to a shell from within Emacs by making it
fully speech enabled. All you do is type m-x and then, at the prompt,
you type the word shell and press enter. You will then hear a command
line prompt which you can treat like you would any other. All of the
cursor movement keys are operational. Also, all of the emacspeak
reading commands are operational so you can interact with other parts
of the screen without moving your cursor. This means, that you can
usually scroll up quite a few lines to read output. This shell is
extremely handy when performing system administration if something you
did caused you to lose speech in Speakup or Orca or Yasr. Emacspeak
then becomes a very nice safety net. Who knows? YOu may even find
that you prefer accessing your shell from Emacspeak as opposed to
speakup or from a terminal within Gnome. It is definitely convenient.
The shell also lets you launch programs like Alpine, Abook and Lynx just as you would in a console session. Emacspeak then acts like a regular screen reader with these solutions.
An immediate use to which you can put the shell in the context of
this tutorial is by compiling the code we wrote earlier in the
"Let's write some code" section. Here's what you do:
1. From anywhere in emacs, type m-x.
2. At the prompt, type shell and press enter.
3. Now, we type g++ program1.cpp -o program1 and press enter.
4. All the compiler messages you may be used to seeing will come
right up for you . Or, if all is well, it compiles without a
hitch. It shouldcompile but, if it doesn't for some reason, you
will have to go in and fix the code. I'm assuming you know some
c++ so you can do that. There are tons of people way more
qualified than me to teach you c++.
The whole thing can be done right from inside Emacspeak. Pretty
convenient, right?
* File Management
Emacs has a very nice file management mode called dired Mode. It's
very powerful and fully enabled with all the Emacspeak functionality.
To access it, type either c-x d or m-x dired. You will be placed in a buffer which
contains a list of the files in your current directory. From here,
you can delete, rename, change ownership, and much much more. It's a
bonified file management system which rivals all the others you have
probably used. Also, it keeps its interface whether you are working
on your own machine's files or even an ftp directory.
to navigate in this area, use your arrow keys to go up and down and
listen to the file names in the directory you are in. To go to
another directory, go to the top of the buffer and arrow down a few
lines until you get to the line containing your current directory
location. Hit c-e twice to get you to the end of the line and either
append the subdirectory you want to go to or backspace until you have
a blank line in which to type the name of the directory you want to
go to. If you don't remember the full name, don't worry. Emacs has
awesome completion features. Just hit page up and you will be taken
to completions buffer where you can arrow to and press enter on the
item you want. Asside from the global hotkeys discussed in the
introductory material, there are many more unique to this mode which
you can find by typing c-h b. Then, c-x o to get to the other window
and read the help file listing them all. If you don't feel up to
hotkeys, there is, of course, a nice set of menus from which you
can choose by hitting alt grave.
* Playing media files in Emacspeak
Note: This section was written by Dave Hunt. Some very minor modifications to sentence structure were made to fit into this tutorial as a whole but, I've changed as little as I could of his original content. Thanks, Dave!---Alex Midence
First things first, using dired mode to browse and listen to music files will not work. In its default setup, dired mode will not
open external apps, such as mplayer. Rather, it will visit the file at
'.' in a new buffer, applying appropriate editing/display 'modes' to this
buffer. In the case of an 'mp3' file, it likely opens in 'fundamental
mode'. This is a text editing mode, used in the absence of other
modes.
If you do not have Mplayer installed on your machine already, go ahead and install it before you set Emacs up to play your media files. Now that mplayer is installed, get the emms (Emacs Multimedia System) package. You can use elpa for this. Next, put some
setup code into '~/.emacs', here it is:
#+BEGIN_SRC emacs-lisp
;;; mark here...
;;; Fore emms.
(require 'emms-setup)
(emms-all)
(emms-default-players)
(setq emms-source-file-default-directory "~/Music/")
;;; end lisp code
#+END_SRC
I cobbled the above together from my reading of the '.info' doc for
emms, and some use of the 'describe-mode', 'describe-variable', and
'describe-function' operations. Being fueled with a super-duper latte
helped, too. While writing this, I started emms-browse-by-artist, one
of the available functions. If your files are tagged, you'll be able to
browse by artist, album, genre, and year. Maybe there are more?
Anyway, you'll get a kind of 'tree view', in which hitting 'spacebar' expands and
collapses branches. 'shift+return' adds selected track to playlist; 'c-j'
plays. You can shuffle, sort, edit your playlist.
Another music option is emacs-m-player, a front-end that controls your
installed mplayer app. One way to start it is to type 'm-x
emacspeak-m-player' and hit 'enter'. You'll be asked for a resource to
play. This should be a playlist, in the form of '.m3u' or '.pls'. The
default is to play tracks, in order. If you want to play a stream, you
can either save its playlist to a local directory, and use
emacspeak-m-player, or, you can use one of the emacs web clients, and an
associatd function for playing the url at '.'. Here's an example: I
like the station 'radioparadise.com'. If I use the w3m browser, I can
visit this main page, go to the 'listen now' area, and select one of the
links. Typing 'l', when the link is under '.', automatically launches
emacspeak-m-player and gives it the stream's playlist. To do this same
thing in the w3 browser, I can put '.' on the desired link, and type 'e
e'. I'll be prompted for the name of the function to pass the url to.
'emacspeak-m-player' should begin playing the stream. If I now go back
to the emacspeak-m-player buffer, I have a few single-key commands,
including '+' and '-' to raise and lower volume. There are a bunch of
commands for adjusting the balance and eq, but I've not used them.
I find the playing of music within emacs very cumbersome, and usually
save my listening for when I'm in Gnome, where I use rhythmbox.
* Wrapping it up
When I set out to write this little tutorial, it was out of a desire
to help prospective new users of Emacspeak get a taste of its power
and potential for enhancing their productivity and do so painlessly
and as quickly as possible. I wanted to do this in such a way that
said newcomers would actually be able to get a feel for this by
accomplishing something worthwhile within the first few minutes after
launching it. I also wanted to do something about decreasing the
steep learning curve Emacs and, by extension Emacspeak has due to the
different interface and the higher expectation of tweaking from the
end user. I hope I have succeeded. I hope that you have decided to
learn more about Emacspeak and that you have been encouraged to
investigate all its possibilities. It is rare that a blind person
finds a truly accessible, low cost, and reliable piece of software
that puts one on an equal footting with sighted counterparts in the
manner Emacspeak does. We can all be grateful that Dr. T. V. Raman
was generous enough to share his software with all of us the way that
he did and that he chose to do so free of cost at a time when
assistive technology seems enamoured with the $1000 figure. The man
can not be commended enough, in my humble opinion. It's no accident
that Emacspeak has gotten the accolades it has and enjoys the fierce
devotion of its userbase the way that it does. I'm sure you will
agree by now that it is an awesome bit of software and a must-have in
your accessibility toolkit.
Hopefully, what you did is pick one of the tasks introduced above,
tried it out and then promptly turned around and tried them all out
possibly in order but maybe not. If you didn't do this, I want you to
go back and do so. Once you have done this, I want you to do some
homework. Yes, I'm a teacher by profession , as it turns out and giving
homework comes as naturally to me as breathing. I want you to
investigate social networking with Emacspeak. I also want you to
check out the games which Dr. Raman has enabled on here. Tetris, for
one, is quite interesting as is chess and all the rest.
As for the social networking stuff, here's a tip, Facebook and Twitter
have their own modes in Emacs whose individual manuals are just a
google search away. E-mail has many modes also, some of them much
more advanced than the one we explored together. A few of these are
built into Emacs itself and still others can be gotten through
Synaptic package manager. This, too, is just a google search away. I
also want you to look into other authoring modes like Muse Mode and
even Auctext. The latter is pretty advanced but, extremely handy to
know since it lets you create a document and set the type-facing on it
so that it comes out looking great and you can do this without vision
just by using markup in the LateX language. For those of you with a
bent towards coding, give Emacs Lisp a shot. There's an info manual
right inside of Emacs that you can use to help you get started right
away. Make some code contributions for us all to benefit from. We
can not expect Dr. Raman to do it all, you know. We must all give
something back. Lastly, I want you to
always be willing to help other newcomers to Emacspeak out by aiding
them in learning this piece of software quickly and become productive
in it very quickly. In fact, share your new discoveries with other users of
all levels in places like the Emacspeak list and the Vinux Forum. I
look forward to learning from such postings.
* Acknowledgements
I'd like to thank some people specifically for their help in filling
in gaps and correcting errors as well as those who provided source
materials from which to draw:
+ Richard M. Stallman and T. V. Raman :: Let's give credit where it
is so truly due, shall we? These two have my sincere grattitude
for creating such an amazing application and interface
respectively.
+ Tim Cross from the Emacspeak list :: Thank you for helping out
with some of the elisp code questions I had.
+ David Ring of the vinux lists :: Your many postings, howto contributions and responses
to inquiries were of immense help as I learned Emacspeak and then
decided to write this document.
+ Robert Crawford from the Emacspeak list :: Your corrections were
invaluable. Thank you very much indeed!
+ Dave Hunt from the Vinux Support Forum :: Thank you for
contributing the section on playing music with Emacspeak.
+ Anthony Sales :: A very very special thank you goes to you
for creating and implementing Vinux. It is a truly wonderful
Linux, absolutely perfect for visually impaired users of all
technical levels.
* Appendices
** Installing Emacspeak
This tutorial was written for users of the Vinux distribution of Linux which, as of version 3.01, comes with Emacspeak pre-installed for you. However, if you are using another distribution or, you just want to build it up yourself, the following supplemental sections wil walk you through doing just that.
*** Using Synaptic
This section assumes prior experience using the Synaptic package
manager system found in Debian-based Linux distributions:
1. From within synaptic, type control f for search and type Emacs and
press enter.
2. Tab a few times till you get to the package column and arrow down
through the choices until you get to either emacs 23 or emacs
gtk.
3. Press control i to mark for installation.
4. Press control p to apply changes and build Emacs before installing
emacspeak.
5. Once Emacs is done installing, type control f for find again and
type in emacspeak.
6 as before and arrow through the choices you
are provided. Emacspeak 32 is the one you want.
7. Mark and apply changes as instructed above with control i and
control p.
8. Inform Emacspeak at the prompt that you are using espeak as a
speech synthesizer and none as the port and select forward.
9. You will need to repeat the port number towards the end of
installation too.
10. Once Emacspeak is done building, just run it from the command
line using emacspeak.
*** Using the command line
In Vinux, installing Emacspeak is as easy as:
#+BEGIN_EXAMPLE
sudo apt-get install emacspeak
#+END_EXAMPLE
All the dependencies will be built for you. The only danger is that
it will build with the emacs 23 Metapackage of Ubuntu and it includes
some stuff whose behavior I am not sure of and which has produced odd
effects for me in the past. You may not have these problems,
however.
If your distribution is other than Vinux, the recommendation is as follows:
1. Install Emacs on your machine first. This is done by either apt-get or through another one of your favorite package management solutions in Linux.
2. Once Emacs is built, then, use that same package manager to build emacspeak on it.
example:
#+BEGIN_EXAMPLE
apt-get install emacs
apt-get install emacspeak
#+END_EXAMPLE
Either way, you will get a menu prompting you to choose which speech synthesizer to use. E-speak is my recommendation since it is free and reliable and can be sped up quite a bit. You will be asked for a server port. Answer none to this question and tab to the forward button and press enter. YOu may be asked this question again. Answer none each time. Eventually, everything will build and you will be able to launch Emacspeak from the console command prompt.
** Emacs and Emacspeak links: For when you want to go fishing
"Give someone a fish, and you have fed them for a meal. Teach them to fish and you have fed them for life."--Somebody very smart.
Now that you have gotten your feet wet with Emacspeak, it's time for you to expand your knowledge. Here are some links you can visit that should help you with that.
+ [[http://emacspeak-guide.sourceforge.net/tutorial.html/][A Gentle Introduction to Emacspeak]] :: This is an old tutorial which still holds valuable information. Just watch out for outdated links in it. It was written way back in good old y2k.
+ [[http://jeremy.zawodny.com/emacs/emacs.html][The Emacs Beginners Howto]] :: An Excelent document written to introduce people to Emacs.
+ [[http://emacspeak.sourceforge.net/info/index.html#Top][Emacspeak User's Manual Second Edition]] :: There are two Emacspeak Users Guides that can be found online, this is the link to the most recent.
+ [[http://emacspeak.sourceforge.net/user-guide/][Emacspeak Users Guide]] :: This is the older document mentioned previously. There are still many valuable pieces of information in there so, I still think it is worth posting here.
+ [[http://www.gnu.org/software/emacs/manual/html_node/emacs/index.html][The Emacs Manual]] :: Not to be confused with the Emacspeak manual, this link takes you to the user's manual for Emacs itself. It is big, exhaustive, and very well-written. It covers just about anything you'd ever want to know about Emacs.
+ [[http://www.emacswiki.org/][The Emacs Wiki]] :: Extremely valuable resource! There is a ton of information to be found here on just about everything.
+ [[http://www.gnu.org/software/emacs/manual/][Online Gnu Emacs Manuals]] :: This page contains links to manuals for many of the modes and extensions discussed in this tutorial and then some.
+ [[http://www.gnu.org/software/emacs/emacs-lisp-intro/html_node/index.html][An Introduction to Emacs Lisp]] :: Eventually, if you use it enough, you'll want to learn how to really tweak Emacs to your specifications. You might even write an extension yourself. This link takes you to a resource for learning how to do just that. At that point, you are officially an Emacs guru.
Finally, Emacspeak has a mailing list to whichyou can subscribe. The subscription address is [[mailto:emacspeak-request@xxxxxxxxxxx][emacspeak-request@xxxxxxxxxxx]] and the address to post messages is [[mailto:emacspeak@xxxxxxxxxxx][emacspeak@xxxxxxxxxxx]]. To browse the list archives, the url is [[https://www.emacspeak.org/VCCS-archive/][https://www.emacspeak.org/VCCS-archive/]].
Now, go fish!
THE END!
If you have questions about this archive or had problems using it, please send mail to:
priestdo@xxxxxxxxxxx No Soliciting!Emacspeak List Archive | 2010 | 2009 | 2008 | 2007 | 2006 | 2005 | 2004 | 2003 | 2002 | 2001 | 2000 | 1999 | 1998 | Pre 1998