[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index][Search]

Re: update on speech server issue


It may be a tcl issue, but if so it is a tcl/emacs issue...as running tcl
outside of emacs works fine.

> An obvious thing to try - so obvious I didn't think of it until now,
> is to just type C-e C-s (Control e followed by control s) after

I've tried that, and sometimes when I enter the sequence it says "Buffer
*scratch* has no process", but eventually it will respond "The speech server is
not running".

> It might be worth verifying what is in your .bash startup scripts as
> well

I've tried this under tcsh and csh as well, without running the "emacspeak"
script, and seen the same problem...but I will attach those files here (I am
attaching the /etc/profile and /etc/bash.bashrc files).  I've tried this under
another user account that has no ~/.bashrc or ~/.profile files, so I will not
attach those.

> Finally, just for clarification - sorry if this sounds stupid, but can
> you confirm you are running the hardware dectalk express.

Yes, plugged into comm port 0.  And like I said it works fine when I run "tcl
dtk-exp" as any user under any version of emacspeak.  The problem only occurs
when actually running emacs.

I don't have any software synths installed on this system.

-Chris

# /etc/bash.bashrc for SuSE Linux
#
# PLEASE DO NOT CHANGE /etc/bash.bashrc There are chances that your changes
# will be lost during system upgrades.  Instead use /etc/bash.bashrc.local
# for your local settings, favourite global aliases, VISUAL and EDITOR
# variables, etc ...

#
# Check which shell is reading this file
#
if test -z "$is" ; then
 if test -f /proc/mounts ; then
  case "`/bin/ls -l /proc/$$/exe`" in
    */bash)	is=bash ;;
    */rbash)	is=bash ;;
    */ash)	is=ash  ;;
    */ksh)	is=ksh  ;;
    */zsh)	is=zsh  ;;
    */*)	is=sh   ;;
  esac
 else
  is=sh
 fi
fi

#
# Colored file listings
#
if test -x /usr/bin/dircolors ; then
    #
    # set up the color-ls environment variables:
    #
    if test -f $HOME/.dir_colors ; then
	eval `dircolors -b $HOME/.dir_colors`
    elif test -f /etc/DIR_COLORS ; then
	eval `dircolors -b /etc/DIR_COLORS`
    fi
fi

#
# ksh/ash soemtimes do not know
#
test -z "$UID"  &&  UID=`id -ur 2> /dev/null`
test -z "$EUID" && EUID=`id -u  2> /dev/null`
test -z "$USER" && USER=`id -un 2> /dev/null`
test -z "$MAIL" && MAIL=/var/spool/mail/$USER
test -z "$LOGNAME"  && LOGNAME=$USER

#
# ls color option depends on the terminal
# If LS_COLROS is set but empty, the terminal has no colors.
#
if test "${LS_COLORS+empty}" = "${LS_COLORS:+empty}" ; then
    LS_OPTIONS=--color=tty
else
    LS_OPTIONS=--color=none
fi
if test "$UID" = 0 ; then
    LS_OPTIONS="-a -N $LS_OPTIONS -T 0"
else
    LS_OPTIONS="-N $LS_OPTIONS -T 0"
fi

#
# Avoid trouble with Emacs shell mode
#
if test "$EMACS" = "t" ; then
    LS_OPTIONS='-N --color=none -T 0';
    tset -I -Q
    stty cooked pass8 dec nl -echo
fi
export LS_OPTIONS

#
# Set prompt and aliases to something useful for an interactive shell
#
case "$-" in
*i*)
    #
    # Some useful functions
    #
    startx  () {
	test -x /usr/X11R6/bin/startx || {
	    echo "No startx installed" 1>&2
	    return 1;
	}
	/usr/X11R6/bin/startx ${1+"$@"} 2>&1 | tee $HOME/.X.err
    }

    remount () { /bin/mount -o remount,${1+"$@"} ; }

    #
    # Set prompt to something useful
    #
    case "$is" in
    bash)
	# Returns short path (last two directories)
	spwd () {
	  ( IFS=/
	    set $PWD
	    if test $# -le 3 ; then
		echo "$PWD"
	    else
		eval echo \"..\${$(($#-1))}/\${$#}\"
	    fi ) ; }
	# Set xterm prompt with short path (last 18 characters)
	ppwd () {
	    local _t="$1" _w _x
	    test -n "$_t"    || return
	    test "${_t#tty}" = $_t && _t=pts/$_t
	    test -O /dev/$_t || return
	    _w="$(dirs +0)"
	    _x="${_w//[^x]/x}"
	    test ${#_x} -le 18 || _w="/...${_w:$((${#_x}-18))}"
	    echo -en "\e]2;${USER}@${HOST}:${_w}\007\e]1;${HOST}\007" > /dev/$_t
	    }
	# If set: do not follow sym links
	# set -P
	#
	# Other prompting for root
	_t=""
	if test "$UID" = 0 ; then
	    _u="\h"
	    _p=" #"
	else
	    _u="\u@\h"
	    _p=">"
	    if test \( "$TERM" = "xterm" -o "${TERM#screen}" != "$TERM" \) \
		    -a -z "$EMACS" -a -n "$DISPLAY"
	    then
		_t="\$(ppwd \l)"
	    fi
	fi
	# With full path on prompt
	PS1="${_t}${_u}:\w${_p} "
#	# With short path on prompt
#	PS1="${_t}${_u}:\$(spwd)${_p} "
#	# With physical path even if reached over sym link
#	PS1="${_t}${_u}:\$(pwd -P)${_p} "
	unset _u _p _t
	;;
    ash)
	cd () {
	    local ret
	    command cd "$@"
	    ret=$?
	    PWD=$(pwd)
	    if test "$UID" = 0 ; then
		PS1="${HOST}:${PWD} # "
	    else
		PS1="${USER}@${HOST}:${PWD}> "
	    fi
	    return $ret
	}
	cd .
	;;
    ksh)
	if test "$UID" = 0 ; then
	    PS1="${HOST}:"'${PWD}'" # "
	else
	    PS1="${USER}@${HOST}:"'${PWD}'"> "
	fi
	;;
    zsh)
#	setopt chaselinks
	if test "$UID" = 0; then
	    PS1='%n@%m:%~ # '
	else
	    PS1='%n@%m:%~> '
	fi
	;;
    *)
#	PS1='\u:\w\$ '
	PS1='\h:\w\$ '
	;;
    esac
    PS2='> '

    if test "$is" = "ash" ; then
	# The ash shell does not have an alias builtin in
	# therefore we use functions here. This is a seperate
	# file because other shells may run into trouble
	# if they parse this even if they do not expand.
	test -s /etc/profile.d/alias.ash && . /etc/profile.d/alias.ash
    else
	unalias ls 2>/dev/null
	if test "$is" = "zsh" ; then
	    alias ls='eval /bin/ls $LS_OPTIONS'
	else
	    alias ls='/bin/ls $LS_OPTIONS'
	fi
	alias dir='ls -l'
	alias ll='ls -l'
	alias la='ls -la'
	alias l='ls -alF'
	alias ls-l='ls -l'

	#
	# Set some generic aliases
	#
	alias o='less'
	alias ..='cd ..'
	alias ...='cd ../..'
	if test "$is" != "ksh" ; then
	    alias -- +='pushd .'
	    alias -- -='popd'
	fi
	alias rd=rmdir
	alias md='mkdir -p'
	alias which='type -p'
	alias rehash='hash -r'
	alias you='yast2 online_update'
	if test "$is" != "ksh" ; then
	    alias beep='echo -en "\007"' 
	else
	    alias beep='echo -en "\x07"'
	fi
	alias unmount='echo "Error: Try the command: umount" 1>&2; false'
	test -s $HOME/.alias && . $HOME/.alias
    fi

    # Complete builtin of the bash 2.0 and higher
    if test "$is" = "bash" ; then
	case "$BASH_VERSION" in
	[2-9].*)
	    if test -e $HOME/.bash_completion ; then
		. $HOME/.bash_completion
	    elif test -e /etc/bash_completion ; then
		. /etc/bash_completion
	    elif test -s /etc/profile.d/complete.bash ; then
		. /etc/profile.d/complete.bash
	    fi

	    ;;
	*)  ;;
	esac
    fi

    # Do not save dupes and lines starting by space in the bash history file
    HISTCONTROL=ignoreboth
    if test "$is" = "ksh" ; then
	# Use a ksh specific history file and enable
    	# emacs line editor
    	HISTFILE=$HOME/.kshrc_history
    	VISUAL=emacs
    fi
    ;;
esac

if test "$is" != "ash" ; then
    #
    # And now let's see if there is a local bash.bashrc
    # (for options defined by your sysadmin, not SuSE Linux)
    #
    test -s /etc/bash.bashrc.local && . /etc/bash.bashrc.local
fi

#
# End of /etc/bash.bashrc
#

# /etc/profile for SuSE Linux
#
# PLEASE DO NOT CHANGE /etc/profile. There are chances that your changes
# will be lost during system upgrades. Instead use /etc/profile.local for
# your local settings, favourite global aliases, VISUAL and EDITOR
# variables, etc ...

#
# Check which shell is reading this file
#
if test -f /proc/mounts ; then
  case "`/bin/ls -l /proc/$$/exe`" in
    */bash)	is=bash ;;
    */rbash)	is=bash ;;
    */ash)	is=ash  ;;
    */ksh)	is=ksh  ;;
    */zsh)	is=zsh  ;;
    */*)	is=sh   ;;
  esac
else
  is=sh
fi

#
# Initialize terminal
#
tty=`tty 2> /dev/null`
test $? -ne 0 && tty=""
if test -O "$tty" -a -n "$PS1"; then
    test -z "${TERM}"		&& { TERM=linux; export TERM; }
    test "${TERM}" = "unknown"	&& { TERM=linux; export TERM; }
    # Do not change settings on local line if connected to remote
    if test -z "$SSH_TTY" ; then
	test -x /bin/stty     && /bin/stty sane cr0 pass8 dec
	test -x /usr/bin/tset && /usr/bin/tset -I -Q
    fi
    # on iSeries virtual console, detect screen size and terminal
    if test -d /proc/iSeries -a \( "$tty" = "/dev/tty1" -o "$tty" = "/dev/console" \) ; then
        LINES=24; COLUMNS=80; export LINES COLUMNS TERM
        test -x /bin/initviocons && { eval `/bin/initviocons -e`; }
    fi
fi
unset TERMCAP

#
# Time until a complete key sequence must have arrived
#
#ESCDELAY=2000
#export ESCDELAY

#
# The user file-creation mask
#
umask 022

#
# ksh/ash soemtimes do not know
#
test -z "$UID"  &&  UID=`id -ur 2> /dev/null`
test -z "$EUID" && EUID=`id -u  2> /dev/null`
test -z "$USER" && USER=`id -un 2> /dev/null`
test -z "$MAIL" && MAIL=/var/spool/mail/$USER
test -z "$HOST" && HOST=`hostname -s 2> /dev/null`
test -z "$CPU"  &&  CPU=`uname -m 2> /dev/null`
test -z "$HOSTNAME" && HOSTNAME=`hostname 2> /dev/null`
test -z "$LOGNAME"  && LOGNAME=$USER
case "$CPU" in
    i?86) HOSTTYPE=i386   ;;
    *)    HOSTTYPE=${CPU} ;;
esac
  OSTYPE=linux
MACHTYPE=${CPU}-suse-${OSTYPE}
# Do NOT export UID, EUID, USER, MAIL, and LOGNAME
export HOST CPU HOSTNAME HOSTTYPE OSTYPE MACHTYPE

#
# Adjust some size limits (see bash(1) -> ulimit)
# Note: You may use /etc/initscript instead to set up ulimits and your PATH.
# Setting of ulimits are skipped if /etc/initscript (ulimit package) exists.
if test "$is" != "ash" -a ! -r /etc/initscript; then
    #ulimit -c 20000		# only core-files less than 20 MB are written
    #ulimit -d 15000		# max data size of a program is 15 MB
    #ulimit -s 15000		# max stack size of a program is 15 MB
    #ulimit -m 30000		# max resident set size is 30 MB

    ulimit -Sc 0		# don't create core files
    ulimit -Sd $(ulimit -Hd)
    ulimit -Ss $(ulimit -Hs)
    ulimit -Sm $(ulimit -Hm)
fi

#
# Make path more comfortable
#
if test -z "$PROFILEREAD" ; then
    PATH=/usr/local/bin:/usr/bin:/usr/X11R6/bin:/bin
    if test "$HOME" != "/" ; then
	for dir in $HOME/bin/$CPU $HOME/bin ; do
	    test -d $dir && PATH=$dir:$PATH
	done
    fi
    test "$UID" = 0 && PATH=/sbin:/usr/sbin:/usr/local/sbin:$PATH
    for dir in  /var/lib/dosemu \
		/usr/games \
		/opt/bin \
		/opt/gnome/bin \
		/opt/kde3/bin \
		/opt/kde2/bin \
		/opt/kde/bin \
		/usr/openwin/bin \
		/opt/cross/bin
    do
	test -d $dir && PATH=$PATH:$dir
    done
    unset dir
    export PATH
fi

#
# Many programs using readline library for line editing
# should know about this (e.g. bash)
#
if test -z "$INPUTRC" ; then
    INPUTRC=/etc/inputrc
    test -s $HOME/.inputrc && INPUTRC=$HOME/.inputrc
    export INPUTRC
fi

#
# Most bourn shell clones knows about this
#
HISTSIZE=1000
export HISTSIZE

#
# Set some environment variables for TeX/LaTeX
#
if test -n "$TEXINPUTS" ; then
    TEXINPUTS=":$TEXINPUTS:$HOME/.TeX:/usr/share/doc/.TeX:/usr/doc/.TeX"
else
    TEXINPUTS=":$HOME/.TeX:/usr/share/doc/.TeX:/usr/doc/.TeX"
fi
export TEXINPUTS

#
# Configure the default pager on SuSE Linux
#
if test -z "$LESS" ; then
    LESS="-M -I"
    LESSKEY=/etc/lesskey.bin
    LESSOPEN="lessopen.sh %s"
    LESSCLOSE="lessclose.sh %s %s"
    LESS_ADVANCED_PREPROCESSOR="no"
    PAGER=less
    export LESSOPEN LESSCLOSE LESS LESSKEY PAGER LESS_ADVANCED_PREPROCESSOR
fi

#
# Minicom 
#
MINICOM="-c on"
export MINICOM

#
# Current manpath
#
unset MANPATH
MANPATH=`test -x /usr/bin/manpath && /usr/bin/manpath -q`
export MANPATH

#
# Some applications do not handle the XAPPLRESDIR environment properly,
# when it contains more than one directory. More than one directory only
# makes sense if you have a client with /usr mounted via nfs and you want
# to configure applications machine dependent. Uncomment the lines below
# if you want this.
#
#XAPPLRESDIR="$XAPPLRESDIR:/var/X11R6/app-defaults:/usr/X11R6/lib/X11/app-defaults"
#export XAPPLRESDIR

#
# Set INFOPATH to tell xemacs where he can find the info files
#
INFODIR=/usr/local/info:/usr/share/info:/usr/info
INFOPATH=$INFODIR
export INFODIR INFOPATH

#
# These settings are recommended for old motif applications
#
XKEYSYMDB=/usr/X11R6/lib/X11/XKeysymDB
export XKEYSYMDB
XNLSPATH=/usr/X11R6/lib/X11/nls
export XNLSPATH

if test -s /etc/nntpserver ; then
    read NNTPSERVER < /etc/nntpserver
    export NNTPSERVER
fi

if test -s /etc/organization ; then
    read ORGANIZATION < /etc/organization
    export ORGANIZATION
fi

#
# Midnight Commander needs this to run in color mode
#
COLORTERM=1
export COLORTERM

#
# For RCS
#
#export VERSION_CONTROL=numbered

#
# Source profile extensions for certain packages
#
if test -d /etc/profile.d -a -z "$PROFILEREAD" ; then
    for s in /etc/profile.d/*.sh ; do
	test -r $s && . $s
    done
    unset s
fi

#
# Source the files generated by SuSEconfig
#
if test -z "$PROFILEREAD" ; then
    test -e /etc/SuSEconfig/profile && . /etc/SuSEconfig/profile
    if test "$(. /etc/sysconfig/language; echo $AUTO_DETECT_UTF8)" = "yes" ; then
	test -r /etc/profile.d/sh.utf8 && . /etc/profile.d/sh.utf8
    fi
fi

if test "$is" != "ash" ; then
    #
    # Source some aliases which provide help for DOS users
    #
    #test -e /etc/profile.dos && . /etc/profile.dos

    #
    # And now let's see if there is a local profile
    # (for options defined by your sysadmin, not SuSE Linux)
    #
    test -s /etc/profile.local && . /etc/profile.local
fi

#
# Avoid overwriting user settings if called twice
#
if test -z "$PROFILEREAD" ; then
    readonly PROFILEREAD=true
    export PROFILEREAD
fi


#
# System BASH specials, maybe also good for other shells
#
test -r /etc/bash.bashrc   && . /etc/bash.bashrc
if test "$is" = "bash" -a -z "$_HOMEBASHRC" ; then
    # loop detection
    readonly _HOMEBASHRC=true
    test -r $HOME/.bashrc  && . $HOME/.bashrc
fi

#
# KSH specials
#
if test "$is" = "ksh" ; then
    test -r /etc/ksh.kshrc && . /etc/ksh.kshrc
fi
if test "$is" = "ksh"  -a -z "$_HOMEKSHRC"  ; then
    # loop detection
    readonly _HOMEKSHRC=true
    test -r $HOME/.kshrc   && . $HOME/.kshrc
fi

## added for emacspeak
export DTK_PROGRAM=dtk-exp
export DTK_PORT=/dev/ttyS0
export EMACSPEAK_DIR="/usr/share/emacs/site-lisp/emacspeak"

#
# End of /etc/profile
#